How to properly service and replace the Mass Air Flow Sensor on Buick Regal?

The replacement process for mass air flow (MAF) sensor must start by switching off ignition and removing the fuel injector sight shield. First step is to detach the Mass Air Flow Sensor electrical connector which connects to the Mass Air Flow Sensor by removing it from its position on the Mass Air Flow Sensor. First disconnect the Mass Air Flow Sensor electrical connector before you remove the screws that affix the Mass Air Flow Sensor to the Throttle Body to remove the Mass Air Flow Sensor. Install the Mass Air Flow Sensor onto the Throttle Body by inserting the screws and fasten them at 3 n.m (27 lb in). Reinstall the fuel injection sight shield after you reconnect the Mass Air Flow Sensor electrical connector to the Mass Air Flow Sensor.

How to replace the Mass Air Flow Sensor with the Intake Air Temperature Sensor on Buick Enclave?

The installation process for intake Air Temperature Sensor starts with removing the air cleaner outlet duct. First disconnect the engine wiring harness electrical connector from the Mass Air Flow Sensor/intake air temperature (IAT) sensor then take out the Mass Air Flow Sensor/iat sensor by removing its screws while moving the sensor from the air cleaner assembly. Next remove the Mass Air Flow Sensor/iat sensor seal. Before installing the Mass Air Flow Sensor/iat sensor attach its corresponding Mass Air Flow Sensor/iat sensor seal to the Mass Air Flow Sensor/iat sensor. Afterward replace the Mass Air Flow Sensor/iat sensor within the air cleaner assembly. Mount the Mass Air Flow Sensor/iat sensor screws into place before securing them to a torque of 4 nm (35 lb in). Connect the engine wiring harness electrical connector to the Mass Air Flow Sensor/iat sensor before putting back the air cleaner outlet duct.

OEM Buick Mass Air Flow Sensor

MAF Sensor Meter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

36 Mass Air Flow Sensors found

View related parts
Buick Mass Air Flow Sensor Part Number: 15875837
$118.91 MSRP: $241.52
You Save: $122.61 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Manifold Sensor Assembly; Manifold Sensor; Air Mass Sensor
- Replaced by: 19355502
Fits the following Buick Models:
- Enclave | 2009-2011 | CX, CXL | 6 Cyl 3.6 L GAS
View related parts
Buick Mass Air Flow Sensor Part Number: 19355501
$101.62 MSRP: $206.40
You Save: $104.78 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Mass Airflow; Manifold Sensor Assembly; Air Mass Sensor; Sensor, Computer Control Sensors
- Replaces: 21994504
Fits the following Buick Models:
- Enclave | 2009 | CX, CXL | 6 Cyl 3.6 L GAS
View related parts
Buick Mass Air Flow Sensor Part Number: 19112535
$181.83 MSRP: $323.78
You Save: $141.95 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Mass Airflow (Remanufacture); Manifold Sensor; Air Mass Sensor; Sensor, Computer Control Sensors
- Replaces: 24503985, 24503678, 88961005
Fits the following Buick Models:
- Park Avenue | 1994-1995 | Base, Ultra | 6 Cyl 3.8 L GAS
- Riviera | 1995 | Base | 6 Cyl 3.8 L GAS
View related parts
Buick Mass Air Flow Sensor Part Number: 24500737
$168.19 MSRP: $299.32
You Save: $131.13 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Th
- Replaced by: 19112534
Fits the following Buick Models:
- Regal | 1990-1991 | Custom, Gran Sport, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick Mass Air Flow Sensor Part Number: 19112536
$173.90 MSRP: $309.56
You Save: $135.66 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Mass Airflow (Remanufacture); Air Mass Sensor
- Replaces: 88961002
Fits the following Buick Models:
- Park Avenue | 1992-1993 | Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Mass Air Flow Sensor Part Number: 19330121
$319.89 MSRP: $573.80
You Save: $253.91 (45%)
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Air Mass Sensor
- Replaces: 25318411, 15904068
Fits the following Buick Models:
- Rainier | 2004-2007 | CXL, CXL Plus | 8 Cyl 5.3 L GAS
View related parts
Buick Mass Air Flow Sensor Part Number: 19351887
Product Specifications
- Other Name: Sensor Assembly, Mass Airflow; Air Mass Sensor
- Replaces: 10349461, 15911983, 19330124
Fits the following Buick Models:
- Enclave | 2008 | CX, CXL | 6 Cyl 3.6 L GAS
- LaCrosse | 2005-2009 | CX, CXL, Super | 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
- Lucerne | 2006-2011 | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
- Rendezvous | 2006-2007 | CX, CXL | 6 Cyl 3.5 L GAS
- Terraza | 2005-2007 | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View More
View related parts
Buick Mass Air Flow Sensor Part Number: 25007540
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Air Cleaner; Air Mass Sensor
Fits the following Buick Models:
- Reatta | 1988-1989 | Base | 6 Cyl 3.8 L GAS
- Riviera | 1986-1989 | Luxury, T-Type | 6 Cyl 3.8 L GAS
- Skylark | 1985-1986 | Custom, Limited | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS
- Somerset | 1986 | Custom, Limited, T-Type | 6 Cyl 3.0 L GAS
- Somerset Regal | 1985 | Base, Limited | 6 Cyl 3.0 L GAS
View More
View related parts
Buick Mass Air Flow Sensor Part Number: 25007652
Product Specifications
- Other Name: Sensor, Computer Control Sensors
Fits the following Buick Models:
- Century | 1984 | Custom, Estate, Limited, Olympia Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Mass Air Flow Sensor Part Number: 25007936
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Air Mass Sensor
Fits the following Buick Models:
- Electra | 1985-1988 | Limited, Park Avenue, T-Type | 6 Cyl 3.8 L GAS
- LeSabre | 1986-1987 | Base, Custom, Limited, T-Type | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Mass Air Flow Sensor Part Number: 19112543
$72.15 MSRP: $126.48
You Save: $54.33 (43%)
Product Specifications
- Other Name: Sensor Assembly, Mass Airflow (Remanufacture); Manifold Sensor; Air Mass Sensor; Sensor, Computer Control Sensors
- Replaces: 88961007
Fits the following Buick Models:
- LeSabre | 2000-2005 | Custom, Limited | 6 Cyl 3.8 L GAS
- Park Avenue | 1999-2005 | Base, Ultra | 6 Cyl 3.8 L GAS
- Regal | 1999-2004 | GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
- Riviera | 1999 | Base | 6 Cyl 3.8 L GAS
View More
View related parts
Buick Thermostat Sensor Part Number: 8997916
Product Specifications
- Other Name: Sensor Assembly, Air Cleaner Air Temperature Sensor; Intake Air Temperature Sensor; Air Intake Temperature Sensor; Sensor, Air Cleaner Controls; Sensor, Air Cleaner Intake
Fits the following Buick Models:
- Century | 1984-1985 | Custom, Estate, Estate Wagon, Limited, Olympia Limited, T-Type | 6 Cyl 3.0 L GAS
- Electra | 1985 | Limited | 6 Cyl 3.0 L GAS
View related parts
Buick Temperature Sensor Part Number: 8997574
Product Specifications
- Other Name: Sensor, A/C; Air Charge Temperature Sensor; Intake Air Temperature Sensor; Air Temperature Sensor; Air Intake Temperature Sensor; Computer Control Sensors; Air Cleaner Controls; Intake Sensor
Fits the following Buick Models:
- Century | 1984-1988 | Custom, Estate, Estate Wagon, Limited, Olympia Limited | 4 Cyl 2.5 L GAS
- Skylark | 1984 | Custom, Limited | 4 Cyl 2.5 L GAS
View related parts
Buick Temperature Sensor Part Number: 8997787
Product Specifications
- Other Name: Sensor, Air Cleaner; Air Charge Temperature Sensor; Intake Air Temperature Sensor; Air Temperature Sensor; Air Intake Temperature Sensor; Vacuum Valve; Air Cleaner Controls; Intake Sensor; Intake Valve
Fits the following Buick Models:
- Skylark | 1984-1986 | Custom, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS
- Somerset | 1986 | Custom, Limited, T-Type | 4 Cyl 2.5 L GAS
- Somerset Regal | 1985 | Base, Limited | 4 Cyl 2.5 L GAS
View More
View related parts
Buick Mass Air Flow Sensor Part Number: 12566846
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Air Mass Sensor
Fits the following Buick Models:
- LaCrosse | 2005-2008 | CXS | 6 Cyl 3.6 L GAS
- Rendezvous | 2004-2006 | CX, CXL, CXL Plus, Ultra | 6 Cyl 3.6 L GAS
View related parts
Buick Mass Air Flow Sensor Part Number: 25007866
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Air Flow Tube
Fits the following Buick Models:
- Regal | 1984-1987 | Base, GNX, Grand National, Limited, T-Type | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L DIESEL
View related parts
Buick Mass Air Flow Sensor Part Number: 25007834
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Air Mass Sensor
Fits the following Buick Models:
- Electra | 1987-1988 | Limited, Park Avenue, T-Type | 6 Cyl 3.8 L GAS
- LeSabre | 1988 | Custom, Limited | 6 Cyl 3.8 L GAS
- Riviera | 1987 | Luxury, T-Type | 6 Cyl 3.8 L GAS
- Skylark | 1987-1988 | Custom, Limited | 6 Cyl 3.0 L GAS
- Somerset | 1987 | Custom, Limited | 6 Cyl 3.0 L GAS
View More
View related parts
Buick Mass Air Flow Sensor Part Number: 25007539
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Air Mass Sensor; Sensor
Fits the following Buick Models:
- Century | 1985-1986 | Custom, Estate Wagon, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 3.8 L GAS
- Electra | 1985 | Limited, Park Avenue, T-Type | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
View related parts
Buick Mass Air Flow Sensor Part Number: 25007872
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Air Mass Sensor; Sensor
Fits the following Buick Models:
- Century | 1986-1988 | Custom, Estate Wagon, Limited, T-Type | 6 Cyl 3.8 L GAS
View related parts
Buick Mass Air Flow Sensor Part Number: 25007877
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Air Mass Sensor
Fits the following Buick Models:
- Century | 1987-1988 | Custom, Estate Wagon, Limited | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS
- Regal | 1988 | Custom, Limited | 6 Cyl 2.8 L GAS

| Page 1 of 2 |Next >

1-20 of 36 Results

Buick Mass Air Flow Sensor

Choose OEM Mass Air Flow Sensor, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Buick's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Buick Mass Air Flow Sensor. You can shop at highly competitive prices and protect your budget. All our genuine Buick parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Buick Mass Air Flow Sensor maintains smooth acceleration, power, mileage, and proper engine breathing. Buick has a hundred years of knowledge on the road and quietly-cabined, but confident ride tuning. Drivers establish themselves, shut the door, and hear no outside noise and seats conform to long hauls without dramatics. The steering is light and precise and thus, parking in the city is easy and on the highway the steering is firmly planted. The company combines the old-fashioned chrome and LED signatures with molded panels which remain fresh. Its electricity-powered Wildcat future suggests that it is not going to rust in the past, opting to use bold shapes and fast charging instead of retro. Touchscreens are high and clear but tangible knobs are kept in the way of volume and temp since common sense prevails over gadget clutter. The safety technology is included and it is not hidden in higher pricier trims, allowing teens and commuters to enjoy the same sense of security. The brand offers sensations of comfort which do not drift to boredom and this shows that even the mundane convenience can have driveway pride. The Mass Air Flow Sensor measures and transmits the precise amount of air passing past its hot wire or swinging vane, explores real-time data to the powertrain computer and only fires the injectors when enough air is available to burn the fuel, which cuts hesitation, eliminates stalling and keeps the ugly check engine light off even with wildly varying altitude, temperature, and throttle position. Clean Mass Air Flow Sensor implies the engine has clear breathing and the drivers of Buick feel the torque they want with each press of the pedal. It also contributes to the longevity of catalytic converters by preventing the raw fuel overload.

Buick Mass Air Flow Sensor Parts and Q&A

Mass Air Flow Sensor
19112543
Q: How to properly service and replace the Mass Air Flow Sensor on Buick Regal?
A:
The replacement process for mass air flow (MAF) sensor must start by switching off ignition and removing the fuel injector sight shield. First step is to detach the Mass Air Flow Sensor electrical connector which connects to the Mass Air Flow Sensor by removing it from its position on the Mass Air Flow Sensor. First disconnect the Mass Air Flow Sensor electrical connector before you remove the screws that affix the Mass Air Flow Sensor to the Throttle Body to remove the Mass Air Flow Sensor. Install the Mass Air Flow Sensor onto the Throttle Body by inserting the screws and fasten them at 3 n.m (27 lb in). Reinstall the fuel injection sight shield after you reconnect the Mass Air Flow Sensor electrical connector to the Mass Air Flow Sensor.
Mass Air Flow Sensor
15875837
Q: How to replace the Mass Air Flow Sensor with the Intake Air Temperature Sensor on Buick Enclave?
A:
The installation process for intake Air Temperature Sensor starts with removing the air cleaner outlet duct. First disconnect the engine wiring harness electrical connector from the Mass Air Flow Sensor/intake air temperature (IAT) sensor then take out the Mass Air Flow Sensor/iat sensor by removing its screws while moving the sensor from the air cleaner assembly. Next remove the Mass Air Flow Sensor/iat sensor seal. Before installing the Mass Air Flow Sensor/iat sensor attach its corresponding Mass Air Flow Sensor/iat sensor seal to the Mass Air Flow Sensor/iat sensor. Afterward replace the Mass Air Flow Sensor/iat sensor within the air cleaner assembly. Mount the Mass Air Flow Sensor/iat sensor screws into place before securing them to a torque of 4 nm (35 lb in). Connect the engine wiring harness electrical connector to the Mass Air Flow Sensor/iat sensor before putting back the air cleaner outlet duct.