How to replace the front wheel bearing and hub on Buick LaCrosse?

Use jack and stands to lift your vehicle before starting the front Wheel Bearing and hub replacement work. Take off the tire and wheel next connect the Wheel Speed Sensor electrical connector if present to remove it from its bracket. After taking off the front wheel drive nut you need to insert a drift or flat-bladed tool between the spokes for protection. Use the j 42129 Wheel Hub remover (J 42129) to clamp the Wheel Bearing and hub unit with three wheel nuts before pushing the wheel drive shaft out with j 42129. Use the j 42129 tool to force the wheel drive shaft out of the Wheel Bearing/hub before removing and discarding all Wheel Bearing/hub bolts while keeping the wheel drive shaft outer seal/boot in safe condition. Take the Wheel Bearing unit and splash guard off their positions and keep track of the splash guard's placement for future reinstallment. Install the new Wheel Bearing/hub system by placing the parts back according to removal steps and use fresh mounting hardware to maintain vehicle control. Lock down new Wheel Bearing/hub bolts to 130 nm (96 ft. Lbs.) afterward place the brake rotor and caliper. Use a drift or flat-blade tool to keep the rotor stationary while hand-tightening the front wheel drive shaft nut to 160 nm (118 ft. Lbs.). Stick the connector clip into its proper position on the bracket then attach the Wheel Speed Sensor electrical connector to its mounting place if installed. Afterward connect the Wheel Speed Sensor electrical connector if it exists. Set the tire and wheel onto the vehicle at the end of service.

How to replace the rear wheel bearing and hub on Buick LaCrosse?

Raise the vehicle from the ground and stabilize it before working on the rear Wheel Bearing and hub replacement. To begin replace the Wheel Bearing hub start by taking off the brake rotor, tires and wheels in this order. Disconnect abs electrical connector from Wheel Speed Sensor and eliminate all bolts that fix the rear bearing and hub. Remove both Wheel Bearing and hub components together with the backing plate. First put the backing plate and Wheel Bearing hub into place before installation. Insert the mounting bolts to the Wheel Bearing hub and tighten them to 75 n.m (55 lb ft). Reattach the abs electrical connector to the Wheel Speed Sensor when it is available before placing the brake rotor and caliper back in place. Reposition the tires and wheels before letting the car down.

OEM Buick LaCrosse Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Wheel Bearings found

View related parts
Buick LaCrosse Hub & Bearing, Rear Part Number: 13585741
$168.64 MSRP: $327.30
You Save: $158.66 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly-Rear Wheel; Wheel Bearing; Axle Bearing; Wheel Hub; Hub & Bearing Assembly; Hub, Rear Wheel
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2009 Buick LaCrosse | CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
Buick LaCrosse Hub Assembly, Front Part Number: 13546938
$86.54 MSRP: $167.96
You Save: $81.42 (49%)
ADD TO CART
Product Specifications
- Other Name: Hub Assembly-Front Wheel; Front Hub & Bearing; Rear Hub & Bearing; Hub & Bearing; Hub & Bearing Assembly
- Position: Front
- Replaces: 13500572, 13507016, 13502829, 13590795, 13580686, 13585466, 13526966, 13583479
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2019 Buick LaCrosse | Avenir, Base, Essence, Preferred, Premium, Sport Touring | 4 Cyl 2.5 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.6 L GAS
View related parts
Buick LaCrosse Hub Assembly, Front Part Number: 84641365
$210.54 MSRP: $412.24
You Save: $201.70 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Hub Assembly, Front Wheel (W/Wheel Speed Sensor); Front Hub & Bearing; Front Wheel Hub Kit; Rear Wheel Hub
- Position: Front
- Replaced by: 19433930
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2009 Buick LaCrosse | CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
Buick LaCrosse Front Hub & Bearing, Rear Part Number: 13546785
$125.51 MSRP: $243.60
You Save: $118.09 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Hub Assembly-Rear Wheel; Rear Hub; Hub & Bearing Assembly; Front Wheel Inner Hub & Bearing; Rear Wheel Bearing
- Position: Rear
- Replaced by: 13564982
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2016 Buick LaCrosse | Base, Convenience, CX, CXL, CXS, Leather, Premium, Sport Touring, Touring | 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Buick LaCrosse Hub Assembly Part Number: 13543412
$96.15 MSRP: $186.60
You Save: $90.45 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub, Rear Wheel (W/Bearing); Front Hub & Bearing; Hub & Bearing; Hub & Bearing Assembly; Hub, Front Wheel; Hub, Rear Wheel
- Replaces: 13507017, 13526967
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2019 Buick LaCrosse | Avenir, Base, Essence, Preferred, Premium, Sport Touring | 4 Cyl 2.5 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.6 L GAS
View related parts
Buick LaCrosse Front Hub & Bearing Part Number: 88964096
Product Specifications
- Other Name: Hub Assembly, Front Wheel; Wheel Bearing & Hub Repair Kit; Axle Bearing.; Hub & Bearing; Hub; Hub, Front Wheel
- Position: Front
- Replaces: 89047803, 12413005, 12413097
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2007 Buick LaCrosse | CX, CXL, CXS | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick LaCrosse Hub & Bearing, Rear Part Number: 19122338
Product Specifications
- Other Name: Hub Assembly, Rear Wheel; Wheel Bearing & Hub; Axle Bearing; Wheel Hub; Hub & Bearing Assembly; Hub, Rear Wheel
- Position: Rear
- Replaces: 12413099
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2009 Buick LaCrosse | CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS

Buick LaCrosse Wheel Bearing

Want to cut long-term maintenance and repair costs? Choose OEM Wheel Bearing. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick LaCrosse parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick LaCrosse Wheel Bearing includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Buick LaCrosse Wheel Bearing is one of the kit parts which greatly improve the dependability and effectiveness of the Buick LaCrosse to be free from vibrations while driving. As a LaCrosse wheel bearing, the product is highly demanded for its durability, especially in supporting the wheels' free movement that helps boost the vehicle efficiency and safety levels. There are three types of hub and bearing designs that are Buick LaCrosse compatible, including the unit assembly with ABS sensor, the Buick LaCrosse Wheel Bearing caters for the needs ranging from the first generation 2004 Buick LaCrosse up to the latest models. If a wheel bearing is neglected it can develop problems like noise and vibration that can become critical safety concerns as in this case being a wheel bearing could completely fail off. The Buick LaCrosse Wheel Bearing should be inspected as often as possible; if there is squealing or grinding, the component should not be used any longer. The replaceable tapered roller bearings have to be readjusted during the reassembly of the units, but this guarantees long service life. Buick LaCrosse is worthy of attention in the automotive segment due to the number of advantages such as the eAssist configuration of the hybrid system and the developed safety measures, as well as the trustworthiness of the wheel bearings which are considered to be very essential to a car. Thus, Buick LaCrosse Wheel Bearing is one of the key components that allow drivers to achieve higher performance level with notable safety margins, which shape public perception of the car model's quality.

Buick LaCrosse Wheel Bearing Parts and Q&A

Hub Assembly, Front
84641365
Q: How to replace the front wheel bearing and hub on Buick LaCrosse?
A:
Use jack and stands to lift your vehicle before starting the front Wheel Bearing and hub replacement work. Take off the tire and wheel next connect the Wheel Speed Sensor electrical connector if present to remove it from its bracket. After taking off the front wheel drive nut you need to insert a drift or flat-bladed tool between the spokes for protection. Use the j 42129 Wheel Hub remover (J 42129) to clamp the Wheel Bearing and hub unit with three wheel nuts before pushing the wheel drive shaft out with j 42129. Use the j 42129 tool to force the wheel drive shaft out of the Wheel Bearing/hub before removing and discarding all Wheel Bearing/hub bolts while keeping the wheel drive shaft outer seal/boot in safe condition. Take the Wheel Bearing unit and splash guard off their positions and keep track of the splash guard's placement for future reinstallment. Install the new Wheel Bearing/hub system by placing the parts back according to removal steps and use fresh mounting hardware to maintain vehicle control. Lock down new Wheel Bearing/hub bolts to 130 nm (96 ft. Lbs.) afterward place the brake rotor and caliper. Use a drift or flat-blade tool to keep the rotor stationary while hand-tightening the front wheel drive shaft nut to 160 nm (118 ft. Lbs.). Stick the connector clip into its proper position on the bracket then attach the Wheel Speed Sensor electrical connector to its mounting place if installed. Afterward connect the Wheel Speed Sensor electrical connector if it exists. Set the tire and wheel onto the vehicle at the end of service.
Hub & Bearing, Rear
13585741
Q: How to replace the rear wheel bearing and hub on Buick LaCrosse?
A:
Raise the vehicle from the ground and stabilize it before working on the rear Wheel Bearing and hub replacement. To begin replace the Wheel Bearing hub start by taking off the brake rotor, tires and wheels in this order. Disconnect abs electrical connector from Wheel Speed Sensor and eliminate all bolts that fix the rear bearing and hub. Remove both Wheel Bearing and hub components together with the backing plate. First put the backing plate and Wheel Bearing hub into place before installation. Insert the mounting bolts to the Wheel Bearing hub and tighten them to 75 n.m (55 lb ft). Reattach the abs electrical connector to the Wheel Speed Sensor when it is available before placing the brake rotor and caliper back in place. Reposition the tires and wheels before letting the car down.