How to replace the TPMS Sensor on Buick LaCrosse?

To replace the Tire Pressure Sensor, lift the vehicle on a suitable support, and remove the tire/wheel assembly. It's recommended that prior to demounting the tire, the cap of the sensor and the valve is to be set down on a clean surface where the cap of the sensor is aluminum, its valve is nickel plated to avoid corrosion, and that the valve and cap are from the same manufacturer. When removing the tire bead from the wheel, position the bead breaking fixture 90 degrees toward the valve stem and place a tire iron, pry bar in, on tire bead releasing to the right of the sensor body then pry tire bead. To transfer the tire bead to the outside of the wheel rim in counter clockwise direction rotate the tire/wheel assembly with the help of tire machine and repeating the same process on the inner bead before extracting the tire from the wheel. In case there is any tire sealant, remove all the remaining liquid sealant from the tire and wheel surfaces. Then, you should dismiss the nut and the sensor of tire pressure. For installation, wash the dirt away on the grommet seal area, connect the sensor into the wheel hole with the passage for air directed away, and install the sensor nut while also orienting the sensor body parallel to the inside of the wheel, tightening it up to 7 N.m (62 lb in). While reinstalling the tire, align the mounting/dismounting head 180 degrees from the valve stem and the bead transition area 45 degrees counterclockwise of the valve stem and rotate the tire/wheel assembly clock-wise to move the tire bead to the inside of the wheel rim and repeat the same for the outer bead before reinstalling the tire on the wheel. Please note that a service replacement tire pressure sensor is shipped in OFF mode, which means that the sensor's internal roll switch should be opened by spinning the tire/wheel assembly faster than 32 km/h (20 mph) for at least 10 seconds. Last of all, mount the tire/wheel assembly onto the car, lower it, and learn about tire pressure sensors.

OEM Buick LaCrosse TPMS Sensor

Tire Pressure Monitoring System Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 TPMS Sensors found

View related parts
Buick LaCrosse TPMS Sensor Part Number: 15921013
$69.79 MSRP: $136.64
You Save: $66.85 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Tire Pressure Indicator; Tire Pressure Monitoring System (TPMS) Sensor; TPMS Capteur; Tire Pressure Sensor; Tire Sensor; Pressure Sensor; Sensor; Sensor, Tire Pressure
- Replaced by: 20925924
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2009 Buick LaCrosse | CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
Buick LaCrosse Tire Pressure Sensor, Black Part Number: 13598909
$10.89 MSRP: $19.44
You Save: $8.55 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Kit, Tire Valve And Cover Lock; TPMS Sensor Service Kit; TPMS Sensor; Valve Stem; Repair Kit; Tire Sensor Valve; TPMS Sensor Valve Assembly; Tire Valve Kit; Vehicle Security & Safety.
- Replaces: 15263240, 19368646
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2019 Buick LaCrosse | Avenir, Base, Convenience, CX, CXL, CXS, Essence, Leather, Preferred, Premium, Sport Touring, Touring | 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Buick LaCrosse TPMS Sensor Nut Part Number: 25976357
$3.11 MSRP: $5.62
You Save: $2.51 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Nut, Tire Pressure; TPMS Sensor Service Kit; Pressure Sensor Nut; Valve Assembly Nut; Tire Sensor Nut
- Replaces: 15242789
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2009 Buick LaCrosse | CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
Buick LaCrosse TPMS Sensor Part Number: 13540601
$53.59 MSRP: $100.64
You Save: $47.05 (47%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Tire Pressure Indicator; Tire Pressure Sensor; Valve Stem; Sensor; Sensor, Vehicle Security & Safety; Sensor, Tire Pressure
- Replaces: 12768826, 13598772, 13589597, 22854866, 20922900, 13589255, 13581558
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2016 Buick LaCrosse | Base, Convenience, CX, CXL, CXS, Leather, Premium, Sport Touring, Touring | 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Buick LaCrosse TPMS Sensor, Black Part Number: 13540600
$52.45 MSRP: $102.68
You Save: $50.23 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Tire Pressure Indicator; Tire Pressure Sensor; Tire Sensor; Pressure Sensor; Sensor; Sensor, Vehicle Security & Safety; Sensor, Tire Pressure
- Replaces: 13598771, 15254101, 25799331, 13586335, 15825475, 15922396, 20923680, 23445327, 25920615, 22853741
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009 Buick LaCrosse | CX, CXL, Super | 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
Buick LaCrosse TPMS Sensor Part Number: 13540602
$29.85 MSRP: $56.06
You Save: $26.21 (47%)
Product Specifications
- Other Name: Sensor Assembly-Tire Pressure Indicator; Tire Pressure Sensor; Sensor; Sensor, Vehicle Security & Safety; Sensor, Tire Pressure
- Replaces: 13581561, 20922901, 25880395, 13589256, 13598773, 22853740, 13589601
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2019 Buick LaCrosse | Avenir, Base, Essence, Preferred, Premium, Sport Touring | 4 Cyl 2.5 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.6 L GAS

Buick LaCrosse TPMS Sensor

Want to cut long-term maintenance and repair costs? Choose OEM TPMS Sensor. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick LaCrosse parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick LaCrosse TPMS Sensor includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

This TPMS Sensor is a crucial part that portrays the brand's reliability and strength, helping drivers to monitor tire pressure and hence, efficiency and safety. This TPMS Sensor is for the direct systems with battery power and is attached to each wheel as a new aid to monitor tire pressure on the following Buick LaCrosse car models: Thus, the TPMS Sensor is responsible for informing drivers about low tire pressure, thus helping to prevent car accidents and increase fuel efficiency; in other words, it is rather useful for all Buick LaCrosse owners. Through clamp-in, screw-in, snap-in, the possibility of autonomous choosing of the most suitable mount type is given to drivers. This has further supported the TPMS Sensor's reputation on the market not only because of its modern design and performance improvement features but also because it incorporated a safety feature in its design. LaCrosse has always been built with modern day technology and safety features incorporated in it and the TPMS Sensor is evidence enough that Buick steers its models in the right direction. Therefore, the TPMS Sensor is not only a part, but a component that can make or mar the driving experience and make every Buick LaCrosse drive safe, and efficient.

Buick LaCrosse TPMS Sensor Parts and Q&A

TPMS Sensor
15921013
Q: How to replace the TPMS Sensor on Buick LaCrosse?
A:
To replace the Tire Pressure Sensor, lift the vehicle on a suitable support, and remove the tire/wheel assembly. It's recommended that prior to demounting the tire, the cap of the sensor and the valve is to be set down on a clean surface where the cap of the sensor is aluminum, its valve is nickel plated to avoid corrosion, and that the valve and cap are from the same manufacturer. When removing the tire bead from the wheel, position the bead breaking fixture 90 degrees toward the valve stem and place a tire iron, pry bar in, on tire bead releasing to the right of the sensor body then pry tire bead. To transfer the tire bead to the outside of the wheel rim in counter clockwise direction rotate the tire/wheel assembly with the help of tire machine and repeating the same process on the inner bead before extracting the tire from the wheel. In case there is any tire sealant, remove all the remaining liquid sealant from the tire and wheel surfaces. Then, you should dismiss the nut and the sensor of tire pressure. For installation, wash the dirt away on the grommet seal area, connect the sensor into the wheel hole with the passage for air directed away, and install the sensor nut while also orienting the sensor body parallel to the inside of the wheel, tightening it up to 7 N.m (62 lb in). While reinstalling the tire, align the mounting/dismounting head 180 degrees from the valve stem and the bead transition area 45 degrees counterclockwise of the valve stem and rotate the tire/wheel assembly clock-wise to move the tire bead to the inside of the wheel rim and repeat the same for the outer bead before reinstalling the tire on the wheel. Please note that a service replacement tire pressure sensor is shipped in OFF mode, which means that the sensor's internal roll switch should be opened by spinning the tire/wheel assembly faster than 32 km/h (20 mph) for at least 10 seconds. Last of all, mount the tire/wheel assembly onto the car, lower it, and learn about tire pressure sensors.