How to Service and Repair the Fuel Pump Strainer on Buick Park Avenue?

Start the Fuel Pump Strainer service and repair with the necessary equipment consisting of the fuel pressure gauge (J 34730). Proper air circulation must be maintained during fuel work to protect workers from possible harm while safety goggles should shield your eyes from fuel droplets that can occur. When working with the fuel sender assembly avoid handling by fuel pipes to protect the joints from damage while also cleaning all fuel pipe connections and hose connections together with the surrounding contacts before disassembly to prevent contamination risks. You should reduce fuel system pressure then empty the Fuel Tank until it reaches 3/4 of the total capacity. Save the proper orientation of the Fuel Pump Strainer and then remove the fuel sender assembly. Use your opposite hand to pull off the external Fuel Pump Strainer from the reservoir while sustaining the reservoir with your other hand. Verify the strainer for contaminants at this time if any are detected discard the strainer. You should separate the electrical connectors from the fuel pump sensor assembly and cover assembly along with the Fuel Level Sensor assembly. Place a new Fuel Pump Strainer on the modular fuel sender with proper seating before reassembling the Fuel Level Sensor assembly as well as electrical connectors. After assembling the fuel sender connect fuel into the system then tightly secure the Fuel Tank filler pipe cap. Review fuel system leaks while turning on and off the ignition according to the specifications by restoring the negative Battery Cable. Proceed with the installation of the fuel sender access panel by using a torque of 2 n.m (18 lb in) on its bolts. After that route the rear compartment trim panel. Then add the spare tire, jack, and spare tire cover before finishing with the fuel injector sight shield.

OEM Buick Fuel Pump Strainer

Fuel Tank Sender Strainer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Fuel Pump Strainers found

View related parts
Buick Fuel Strainer Part Number: 25166285
$12.60 MSRP: $21.14
You Save: $8.54 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strainer Package, Fuel; Filter; Strainer; Strainer Kit, Fuel Pump Pressure; Strainer Kit, Fuel Tank Gage; Strainer, Fuel Tank Gage
- Replaces: 25121625
Fits the following Buick Models:
- Park Avenue | 1997 | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Fuel Strainer Part Number: 25335946
Product Specifications
- Other Name: Strainer Package, Fuel; Fuel Pump Strainer; Strainer Kit, Fuel Tank Gage
Fits the following Buick Models:
- Park Avenue | 1998 | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Fuel Strainer Part Number: 25335945
Product Specifications
- Other Name: Strainer Package, Fuel; Fuel Pump Strainer; Strainer; Strainer Kit, Fuel Tank Gage
Fits the following Buick Models:
- Park Avenue | 1999-2000 | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Fuel Strainer Part Number: 25330712
Product Specifications
- Other Name: Strainer Package, Fuel; Fuel Pump Strainer; Strainer Kit, Fuel Tank Gage
Fits the following Buick Models:
- Park Avenue | 2000 | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Fuel Strainer Part Number: 25163907
Product Specifications
- Other Name: Strainer Kit, Fuel; Fuel Pump Strainer; Strainer; Strainer Kit, Fuel Tank Gage
Fits the following Buick Models:
- Park Avenue | 1997 | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Fuel Strainer Part Number: 25330711
Product Specifications
- Other Name: Strainer Package, Fuel; Fuel Pump Strainer; Strainer; Strainer Kit, Fuel Tank Gage
Fits the following Buick Models:
- Park Avenue | 1998 | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Fuel Strainer Part Number: 25121664
Product Specifications
- Other Name: Strainer Package, Fuel; Fuel Pump Strainer; Strainer; Strainer, Fuel Tank Gage
- Replaces: 25121754
Fits the following Buick Models:
- LeSabre | 1997-1999 | Custom, Limited | 6 Cyl 3.8 L GAS

Buick Fuel Pump Strainer

Choose OEM Fuel Pump Strainer, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Buick's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Buick Fuel Pump Strainer. You can shop at highly competitive prices and protect your budget. All our genuine Buick parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Buick Fuel Pump Strainer has filtered out grit and all other engine sips clean fuel. Established in 1903, Buick was a combination of pioneering automotive adventure and comfortable roadside demeanor that drivers pursue to this day, combining luxurious interiors with hushed tuning that leaves highway noise dull without deadening the excitation of movement. The long run is evident in the brand being willing to make pivots with the Buick launching the Wildcat EV concept to give a preview of a more sleek battery-driven future and at the same time remember its history with chrome lining. Years of development ensure that every ride is smooth sailing and free of drama but steering remains responsive and brakes grab early, which is a constant reminder to the owners that comfort does not equate to drowsy handling. Nimble packaging will provide spacious legroom with the soft suspensions taking up potholes that jackhammer smaller cars. As the gasoline moves out of the tank to the injectors, Fuel Pump Strainer filters out sand, rust flakes, and roadside grit before they can abrade the pump or block the spray nozzles so that the flow rate and throttle body remain the same mile after mile. The mesh is constructed so that it can be applied repeatedly in the cycles of the hot/cold area in addition to the constant slosh so that the mesh can resist collapsing and the owners can replace it with simple hand tools to eliminate the downtime. A new Fuel Pump Strainer will keep off rough startups, spurters, and early pump failure that will give the driver the opportunity to rev the odometer to the six digits without questioning what is in the tank.

Buick Fuel Pump Strainer Parts and Q&A

Fuel Strainer
25330712
Q: How to Service and Repair the Fuel Pump Strainer on Buick Park Avenue?
A:
Start the Fuel Pump Strainer service and repair with the necessary equipment consisting of the fuel pressure gauge (J 34730). Proper air circulation must be maintained during fuel work to protect workers from possible harm while safety goggles should shield your eyes from fuel droplets that can occur. When working with the fuel sender assembly avoid handling by fuel pipes to protect the joints from damage while also cleaning all fuel pipe connections and hose connections together with the surrounding contacts before disassembly to prevent contamination risks. You should reduce fuel system pressure then empty the Fuel Tank until it reaches 3/4 of the total capacity. Save the proper orientation of the Fuel Pump Strainer and then remove the fuel sender assembly. Use your opposite hand to pull off the external Fuel Pump Strainer from the reservoir while sustaining the reservoir with your other hand. Verify the strainer for contaminants at this time if any are detected discard the strainer. You should separate the electrical connectors from the fuel pump sensor assembly and cover assembly along with the Fuel Level Sensor assembly. Place a new Fuel Pump Strainer on the modular fuel sender with proper seating before reassembling the Fuel Level Sensor assembly as well as electrical connectors. After assembling the fuel sender connect fuel into the system then tightly secure the Fuel Tank filler pipe cap. Review fuel system leaks while turning on and off the ignition according to the specifications by restoring the negative Battery Cable. Proceed with the installation of the fuel sender access panel by using a torque of 2 n.m (18 lb in) on its bolts. After that route the rear compartment trim panel. Then add the spare tire, jack, and spare tire cover before finishing with the fuel injector sight shield.