How to replace the front seat armrest cup holder on Buick Century?

Before replacing the front seat armrest Cup Holder, users must get the armrest lid open and extend the Cup Holder. Press the mounting bracket of the Cup Holder assembly toward each other until the pins exit the armrest storage box sides before taking out the Cup Holder. Place the new Cup Holder inside the armrest while you should squeeze the mounting bracket to align the pins properly into the mounting holes. Migrate the Cup Holder into its closed configuration following lid closure for the armrest.

How to replace the front floor console cup holder on Buick LeSabre?

There are two steps to replace the front floor console Cup Holder. Start by removing the retainers that fasten the Cup Holder to the Center Console followed by performing Cup Holder extraction. Set the Cup Holder in its position then install its retaining fasteners and tighten them to 2 n.m using 18 lb in torque.

OEM Buick Cup Holder

Drink Holder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

93 Cup Holders found

View related parts
Buick Cup Holder Part Number: 90904973
$122.40 MSRP: $182.97
You Save: $60.57 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Holder, Floor Console
- Position: Front
Fits the following Buick Models:
- LaCrosse | 2014-2016 | Base, Leather, Premium, Sport Touring | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Buick Cup Holder Part Number: 84836170
$121.17 MSRP: $181.13
You Save: $59.96 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Holder, Floor Console
Fits the following Buick Models:
- Enclave | 2022-2024 | Avenir | 6 Cyl 3.6 L GAS
View related parts
Buick Cup Holder Part Number: 84683863
$120.64 MSRP: $180.34
You Save: $59.70 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Holder, Floor Console
- Replaces: 84438473
Fits the following Buick Models:
- Enclave | 2018-2019 | Avenir | 6 Cyl 3.6 L GAS
View related parts
Buick Liner Part Number: 84621976
$35.58 MSRP: $52.96
You Save: $17.38 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Liner, Instrument Panel
- Position: Rear
Fits the following Buick Models:
- Envision | 2021-2023 | Avenir, Essence, Preferred | 4 Cyl 2.0 L GAS
View related parts
Buick Cup Holder, Front Part Number: 26217586
$64.12 MSRP: $95.42
You Save: $31.30 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Holder Assembly-Front Floor Console *Asagi Madaraa; Holder, Floor Console
- Position: Front
- Replaces: 26694938
Fits the following Buick Models:
- LaCrosse | 2017-2019 | Avenir, Base, Essence, Preferred, Premium, Sport Touring | 4 Cyl 2.5 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.6 L GAS
View related parts
Buick Cup Holder, Beige Part Number: 84683862
$102.07 MSRP: $151.88
You Save: $49.81 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Holder, Floor Console
- Replaces: 84367018, 84438472
Fits the following Buick Models:
- Enclave | 2018-2024 | Base, Essence, Preferred, Premium | 6 Cyl 3.6 L GAS
View related parts
Buick Cup Holder Part Number: 42500502
$6.61 MSRP: $9.84
You Save: $3.23 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Holder, Seat Separator Console; Holder, Floor Console
- Position: Front
Fits the following Buick Models:
- Encore | 2017-2022 | Base, Essence, Preferred, Preferred II, Premium, Sport Touring | 4 Cyl 1.4 L GAS
View related parts
Buick Cup Holder, Black Part Number: 84367019
$110.77 MSRP: $164.84
You Save: $54.07 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Holder, Floor Console
- Position: Front
Fits the following Buick Models:
- Enclave | 2018-2021 | Avenir | 6 Cyl 3.6 L GAS
View related parts
Buick Cup Holder Part Number: 15119264
$9.63 MSRP: $14.34
You Save: $4.71 (33%)
ADD TO CART
Product Specifications
- Other Name: Holder, Instrument Panel
Fits the following Buick Models:
- Terraza | 2005-2007 | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Buick Liner, Front Part Number: 15888995
Product Specifications
- Other Name: Liner-Front Floor Console Cup Holder *Ebony; Liner, Seat Separator Console
- Position: Front
Fits the following Buick Models:
- Enclave | 2008-2017 | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
View related parts
Buick Cup Holder Part Number: 88986013
Product Specifications
- Other Name: Holder, Seat Separator Console; Liner; Liner, Seat Separator Console
- Position: Front
Fits the following Buick Models:
- Rainier | 2004-2007 | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
Buick Cup Holder, Gray Part Number: 89044980
Product Specifications
- Other Name: Holder, Front Floor Console Cup *Gray; Rear Panel; Holder, Seat Separator Console
- Position: Front
Fits the following Buick Models:
- Rainier | 2005-2007 | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
Buick Cup Holder, Front Part Number: 12520805
Product Specifications
- Other Name: Holder, Front Seat Arm Rest
- Position: Front
Fits the following Buick Models:
- Century | 1990-1992 | Custom, Limited, Special | 4 Cyl 2.5 L GAS, 6 Cyl 3.3 L GAS
View related parts
Buick Cup Holder Part Number: 25804618
$68.47 MSRP: $101.88
You Save: $33.41 (33%)
Product Specifications
- Other Name: Holder, Floor Console
- Position: Front
- Replaces: 15843174
Fits the following Buick Models:
- Lucerne | 2006-2011 | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
Buick Cup Holder, Red Part Number: 12480841
Product Specifications
- Other Name: Holder; Holder, Floor Console
Fits the following Buick Models:
- Park Avenue | 1997-1999 | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Cup Holder, Gray, Rear Part Number: 15932811
Product Specifications
- Other Name: Holder; Holder, Body Interior Trim
- Position: Rear
Fits the following Buick Models:
- Terraza | 2005-2007 | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Buick Cup Holder Part Number: 22587398
Product Specifications
- Other Name: Holder Assembly; Holder, Floor Console
Fits the following Buick Models:
- Skylark | 1993 | Custom, Gran Sport, Limited | 4 Cyl 2.3 L GAS, 6 Cyl 3.3 L GAS
View related parts
Buick Cup Holder Part Number: 22592175
Product Specifications
- Other Name: Holder Assembly; Holder, Floor Console
Fits the following Buick Models:
- Skylark | 1994-1995 | Custom, Gran Sport, Limited | 4 Cyl 2.3 L GAS, 6 Cyl 3.1 L GAS
View related parts
Buick Cup Holder Part Number: 22599247
Product Specifications
- Other Name: Holder; Holder, Floor Console
Fits the following Buick Models:
- Skylark | 1996-1998 | Custom, Gran Sport, Limited, Olympic Gold Edition | 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
View related parts
Buick Cup Holder, Blue, Rear Part Number: 88893809
Product Specifications
- Other Name: Holder; Holder, Rear Seat Cushion (With Frame)
- Position: Rear
Fits the following Buick Models:
- LeSabre | 2000-2001 | Custom, Limited | 6 Cyl 3.8 L GAS

| Page 1 of 5 |Next >

1-20 of 93 Results

Buick Cup Holder

Choose OEM Cup Holder, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Buick's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Buick Cup Holder. You can shop at highly competitive prices and protect your budget. All our genuine Buick parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Buick Cup Holder is designed to hold beverages in place and you will never miss a beat. Established in 1903, Buick was established through cushioning rides, peaceful cabins, and non-nonsense dependability, a combination which allowed everyday commuting to be more of a glide rather than a grind. The company continues to perfect that feel with tricks of quiet tuning, solid body seams that shrug off vibration and infotainment layouts that react to touch in most cases faster than most phones. It went further to introduce the Wildcat EV concept to demonstrate that it could combine centuries-old craft with clean electric power without abandoning its relaxed attitude. Families will feel the roomy rows of seats, commuters the fuel numbers and everybody will notice that the steering remains light but true on serpentine lanes or broken city streets. Buick provides comfort in the first place and can be challenged to be outdated. Similarly, the Cup Holder slides, folds and clamps to hold the skinny espresso cans to gym giant bottles, in all manners fitting into the console so that the elbows are kept clear and spillage at zero. Since Buick has the mount lined with sound-absorbing rubber, all the bangs of potholes are terminated there, rather than reverberating along the cabin, and a snap-out tray tubes the tap as life grows sticky. The Cup Holder switches between the front, middle, or rear slots within seconds, which means that all of the seats receive equal rights to sipping and no one is forced to stop the road trip to carry a cup with arm.

Buick Cup Holder Parts and Q&A

Cup Holder
12533205
Q: How to replace the front seat armrest cup holder on Buick Century?
A:
Before replacing the front seat armrest Cup Holder, users must get the armrest lid open and extend the Cup Holder. Press the mounting bracket of the Cup Holder assembly toward each other until the pins exit the armrest storage box sides before taking out the Cup Holder. Place the new Cup Holder inside the armrest while you should squeeze the mounting bracket to align the pins properly into the mounting holes. Migrate the Cup Holder into its closed configuration following lid closure for the armrest.
Liner
25735231
Q: How to replace the front floor console cup holder on Buick LeSabre?
A:
There are two steps to replace the front floor console Cup Holder. Start by removing the retainers that fasten the Cup Holder to the Center Console followed by performing Cup Holder extraction. Set the Cup Holder in its position then install its retaining fasteners and tighten them to 2 n.m using 18 lb in torque.