How to service and repair the Brake Proportioning Valve on Buick Regal?

Begin the repair work on Brake Proportioning and Combination Valve with correct suspension of the vehicle during lift-up. You should remove all dirt and foreign materials both from the brake pipes and from the proportioning valve before starting service. Untwist the brake pipes from the proportioning valve through back up wrench usage before you remove the valve itself. After returning the valve to its spot, attach brake pipes to the valve with a back up wrench. Tighten Proportioning Valve Tube Nut to 15 Nm (11 ft. lbs.) for installation. End the process by putting down the vehicle before performing brake servicing steps.

How to replace the Brake Proportioning Valve on Buick Rendezvous?

Before the process start you need to disconnect the brake pipes from both the proportion valve and the master cylinder on their respective end points. To remove the proportion valve you should first take off the mounting bracket nuts and then lift off the valve from its bracket. Set the proportion valve directly on the bracket and fasten it with retaining nuts before tightening them to 10 N.m (84 lb in). Connect the master cylinder brake pipes to the proportion valve and tighten both types of fittings to proper torque values as specified. Finally, bleed the brake system.

OEM Buick Brake Proportioning Valve

Proportioning Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

30 Brake Proportioning Valves found

View related parts
Buick Pressure Metering Valve Part Number: 18014469
$13.11 MSRP: $16.23
You Save: $3.12 (20%)
ADD TO CART
Product Specifications
- Other Name: Brake Proportioning Valve; Valve
Fits the following Buick Models:
- Century | 1997-1998 | Custom, Limited | 6 Cyl 3.1 L GAS
- Regal | 1997-1998 | 25th Anniversary Edition, GS, LS | 6 Cyl 3.8 L GAS
- Skylark | 1987-1998 | Base, Custom, Gran Sport, Limited, Luxury Edition, Olympic Gold Edition | 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS
- Somerset | 1987 | Custom, Limited | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View More
View related parts
Buick Modulator Valve Part Number: 19416842
Product Specifications
- Other Name: Valve Assembly, Brake Pressure Mode; Modulator; Valve, Electronic Brake Control
- Replaces: 15269563, 19121327
Fits the following Buick Models:
- LaCrosse | 2005-2009 | CX, CXL | 6 Cyl 3.8 L GAS
View related parts
Buick Pressure Valve Part Number: 25731523
Product Specifications
- Other Name: Valve, Electronic Brake Control; ABS Pump And Motor Assembly; ABS Control Module; Modulator Valve; ABS Pump Assembly; Pressure Modulator Valve; ABS Regulator; Modulator
- Replaces: 25641265
Fits the following Buick Models:
- LeSabre | 1996-1999 | Custom, Limited | 6 Cyl 3.8 L GAS
- Park Avenue | 1996-1999 | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Proportioner Valve Part Number: 15835454
$79.79 MSRP: $142.48
You Save: $62.69 (44%)
Product Specifications
- Other Name: Valve Assembly-Brake Proportioning; Brake Proportioning Valve; Valve, Brake Master Cylinder Proportioning
- Replaces: 10330851
Fits the following Buick Models:
- Rendezvous | 2003-2007 | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Buick Modulator Valve Part Number: 19416886
Product Specifications
- Other Name: Valve Assembly, Brake Pressure Mode (W/Electronic Brake Control Module); Modulator; Valve, Electronic Brake Control
- Replaces: 19121329
Fits the following Buick Models:
- LaCrosse | 2005-2007 | CXS | 6 Cyl 3.6 L GAS
View related parts
Buick Modulator Valve Part Number: 19416839
Product Specifications
- Other Name: Valve Assembly, Brake Pressure Mode (W/Electronic Brake Control Module); Modulator; Valve, Electronic Brake Control
- Replaces: 15270028, 19152722
Fits the following Buick Models:
- LaCrosse | 2007-2008 | CXS | 6 Cyl 3.6 L GAS
View related parts
Buick Modulator Part Number: 19416837
Product Specifications
- Other Name: Valve Assembly, Brake Pressure Mod (W/ Electronic Brake & Traction Control Module); Valve, Electronic Brake Control
- Replaces: 19150475
Fits the following Buick Models:
- LaCrosse | 2008-2009 | Super | 8 Cyl 5.3 L GAS
View related parts
Buick Control Valve Part Number: 15269794
Product Specifications
- Other Name: Valve, Electronic Brake Control; ABS Control Module; Modulator Valve
- Replaces: 10333639
Fits the following Buick Models:
- Rendezvous | 2004-2006 | CX, CXL, CXL Plus, Ultra | 6 Cyl 3.6 L GAS
View related parts
Buick Modulator Valve Part Number: 3542471
Product Specifications
- Other Name: Valve Assembly-Brake Pressure Mod; Brake Proportioning Valve; ABS Control Module; ABS Regulator; Valve; Modulator; Valve, Electronic Brake Control
Fits the following Buick Models:
- Riviera | 1991-1993 | Luxury | 6 Cyl 3.8 L GAS
View related parts
Buick Pressure Metering Valve Part Number: 10156998
Product Specifications
- Other Name: Valve Assembly-Brake Combination; Brake Proportioning Valve; Valve, Hydraulic Brake Combination/Monitoring Valve
Fits the following Buick Models:
- Roadmaster | 1992-1993 | Base, Estate Wagon, Limited | 8 Cyl 5.7 L GAS
View related parts
Buick Pressure Metering Valve Part Number: 3523171
Product Specifications
- Other Name: Valve Assembly-Brake Combination; Brake Proportioning Valve; Valve, Hydraulic Brake Combination/Monitoring Valve
Fits the following Buick Models:
- Roadmaster | 1991-1993 | Base, Estate Wagon, Limited | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Buick Pressure Valve Part Number: 19416841
Product Specifications
- Other Name: Valve Assembly, Brake Pressure Mode; ABS Pump And Motor Assembly; Modulator Valve; ABS Pump Assembly; Valve; Valve, Electronic Brake Control
- Replaces: 25720864, 25698056
Fits the following Buick Models:
- LeSabre | 2000-2005 | Custom, Limited | 6 Cyl 3.8 L GAS
- Park Avenue | 2000-2005 | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Pressure Valve Part Number: 19416835
Product Specifications
- Other Name: Valve Assembly, Brake Pressure Mode; ABS Pump And Motor Assembly; Modulator Valve; ABS Pump Assembly; Valve; Modulator; Valve, Electronic Brake Control
- Replaces: 25720865, 25698057
Fits the following Buick Models:
- LeSabre | 2000-2005 | Custom, Limited | 6 Cyl 3.8 L GAS
- Park Avenue | 2000-2005 | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Valve Block Part Number: 25533639
Product Specifications
- Other Name: Valve, Brake Master Cylinder Proportioning; Brake Proportioning Valve; Pressure Metering Valve; Modulator; Valve, Brake Master Cylinder Reservoir
Fits the following Buick Models:
- Electra | 1989-1990 | Limited, Park Avenue, Park Avenue Ultra, T-Type | 6 Cyl 3.8 L GAS
- Park Avenue | 1991-1993 | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Modulator Valve Part Number: 19416838
Product Specifications
- Other Name: Valve Assembly, Brake Pressure Mode (W/Electronic Brake Control Module); Modulator; Valve, Electronic Brake Control
- Replaces: 19152724, 10341578, 15269566
Fits the following Buick Models:
- LaCrosse | 2005-2006 | CXS | 6 Cyl 3.6 L GAS
View related parts
Buick Modulator Part Number: 10326046
Product Specifications
- Other Name: Valve Assembly-Brake Pressure Mod (W/ Electronic Brake; ABS Control Module; Valve Kit, Electronic Brake Control; Valve, Electronic Brake Control
- Replaces: 10431737
Fits the following Buick Models:
- Century | 2001-2002 | Custom, Limited | 6 Cyl 3.1 L GAS
- Regal | 2001-2002 | GS, LS | 6 Cyl 3.8 L GAS
View related parts
Buick Control Valve Part Number: 15269784
Product Specifications
- Other Name: Valve, Electronic Brake Control; ABS Control Module; Modulator Valve
- Replaces: 10315284, 10333414
Fits the following Buick Models:
- Rendezvous | 2002-2006 | CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
Buick Modulator Valve Part Number: 3545142
Product Specifications
- Other Name: Valve Assembly-Brake Pressure Mod; ABS Control Module; ABS Regulator; Control Module Assembly; Modulator; Valve, Electronic Brake Control
Fits the following Buick Models:
- Riviera | 1993 | Luxury | 6 Cyl 3.8 L GAS
View related parts
Buick Modulator Valve Part Number: 10282600
Product Specifications
- Other Name: Valve, Electronic Brake Control; Modulator
Fits the following Buick Models:
- Commercial Chassis | 1995-1996 | Base | 8 Cyl 5.7 L GAS
- Roadmaster | 1995-1996 | Base, Collector's Edition, Estate Wagon, Estate Wagon Collector's Edition, Limited, Limited Collector's Edition | 8 Cyl 5.7 L GAS
View related parts
Buick Pressure Valve Part Number: 12455422
Product Specifications
- Other Name: Valve Assembly, Brake Pressure Mode; ABS Control Module; Modulator Valve; Modulator; Valve, Electronic Brake Control
Fits the following Buick Models:
- Commercial Chassis | 1991-1994 | Base | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- Roadmaster | 1991-1994 | Base, Estate Wagon, Limited | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS

| Page 1 of 2 |Next >

1-20 of 30 Results

Buick Brake Proportioning Valve

Choose OEM Brake Proportioning Valve, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Buick's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Buick Brake Proportioning Valve. You can shop at highly competitive prices and protect your budget. All our genuine Buick parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

The Buick Brake Proportioning Valve provides a front-rear brake pressure ratio and allows the driver to have sharper control in the event of a sudden stop. Born in 1903, Buick combines the vintage car culture with modern-day sophistication by pursuing silent cabins and smooth road etiquette rather than empty flash. The company eliminates noise by clever tuning and includes driver-oriented devices that make a long ride seem a short one, all without losing their cool but being cool. The badge remained appropriate over the decades, combining the smooth V8 reminiscence with turbocharged aggressiveness and today with brash electric drawings like the Wildcat concept. Luxury is not so serious with its carbon-fiber boasting, more leather and warm steering than brittle and more of a comfort-oriented approach to things which never border on gimmickry. The Brake Proportioning Valve channels fluid inside the hydraulic maze, ensuring the front discs bite first with rear drums taking their turn before rear lockup takes place, which would spin the car in case of a panic attack. The device is designed to be durable and maintain steady pressure and has centralized flow routes to every line, stripping off excess force and maintaining a firm feel of the pedal after a hard stop. All modern Buicks are made to have that confidence as this Brake Proportioning Valve will not give up when it gets hot or with age.

Buick Brake Proportioning Valve Parts and Q&A

Pressure Metering Valve
10289556
Q: How to service and repair the Brake Proportioning Valve on Buick Regal?
A:
Begin the repair work on Brake Proportioning and Combination Valve with correct suspension of the vehicle during lift-up. You should remove all dirt and foreign materials both from the brake pipes and from the proportioning valve before starting service. Untwist the brake pipes from the proportioning valve through back up wrench usage before you remove the valve itself. After returning the valve to its spot, attach brake pipes to the valve with a back up wrench. Tighten Proportioning Valve Tube Nut to 15 Nm (11 ft. lbs.) for installation. End the process by putting down the vehicle before performing brake servicing steps.
Proportioner Valve
15835454
Q: How to replace the Brake Proportioning Valve on Buick Rendezvous?
A:
Before the process start you need to disconnect the brake pipes from both the proportion valve and the master cylinder on their respective end points. To remove the proportion valve you should first take off the mounting bracket nuts and then lift off the valve from its bracket. Set the proportion valve directly on the bracket and fasten it with retaining nuts before tightening them to 10 N.m (84 lb in). Connect the master cylinder brake pipes to the proportion valve and tighten both types of fittings to proper torque values as specified. Finally, bleed the brake system.