Other Name: Handle Assembly-Intermediate Side Door Outside; Exterior Door Handle; Handle, Door Outside Handle
Position: Driver Side
Item Weight: 0.90 Pounds
Item Dimensions: 5.1 x 5.0 x 11.5 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 25989392
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2010 GMC Savana 1500 Submodels:
Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX
2010 GMC Savana 1500 Door Handle
With a comprehensive array of OEM 2010 GMC Savana 1500 Door Handle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 GMC Savana 1500 Door Handle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2010 GMC Savana 1500 Door Handle Parts and Q&A
Q: How to replace the front door exterior door handle on 2010 GMC Savana 1500?
A: The initial step to replace the front door exterior handle involves raising the window all the way up. Begin the installation by eliminating the front door trim panel followed by extracting the water deflector. Lock the hardware by freeing the lock rods from their insertion into the lock. The rear run channel must be lifted vertically to reach nuts securing the outside Door Handle to the door so these nuts along with the bracket can be taken out. Disassemble the outside Door Handle after completing the step. Begin new outside Door Handle installation by placing it onto the door then access the handle studs through the rear run channel raise. Secure the new handle with the bracket and nuts that fit in the studs. Tighten the nuts to 11 nm which corresponds to 97 lb in to maintain the proper fit of the handle. Complete the installation by attaching lock rods to the lock then putting on the water deflector followed by reinstallation of the front door trim panel.