How to replace the exhaust heat shield on the dash panel on 2010 Chevrolet Tahoe?

The first step to replace the dash panel Exhaust Heat Shield is to lift the vehicle then support it under its frame. First remove all bolts from the engine shield then detach the shield from its position. The removal process begins with extracting oil pan skid plate bolts as well as the skid plate from 1500 series models. The 2500 series requires bolt removal of both rear oil pan skid plate fasteners followed by removing the front oil pan skid plate fasteners and the skid plate if it is installed. The process requires discarding the Catalytic Converter if needed. Remove the dash panel Exhaust Heat Shield nuts (2 or 4) followed by installing the dash panel Exhaust Heat Shield (1 or 3) to the dash panel studs. Install the dash panel Exhaust Heat Shield (1 or 3) to the dash panel studs by tightly securing its nuts (2 or 4) with a torque of 9 nm (80 lb in). Reinstallation of the Catalytic Converter should proceed if required. The installation for 2500 series vehicles begins with placing the oil pan skid plate correctly before tightening the bolt at the rear position to 28 nm (21 lb ft). Additional elements for front bolts may exist which need installation and tightening to 28 nm (21 lb ft) if the vehicle has them. The 1500 series vehicles should have their oil pan skid plate both positioned and bolted with torque set at 28 nm (21 lb ft). Place the engine shield on the frame while installing its bolts to 20 nm (15 lb ft) before the vehicle reaches the ground.

OEM 2010 Chevrolet Tahoe Exhaust Heat Shield

Heat Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Exhaust Heat Shields found

View related parts
2010 Chevrolet Tahoe Heat Shield, Passenger Side Part Number: 12677664
$80.16 MSRP: $119.28
You Save: $39.12 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Passenger Side
- Replaces: 12648338
- Item Weight: 3.20 Pounds
- Item Dimensions: 21.8 x 10.4 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12677664
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Tahoe Submodels:
- Base, Hybrid, LS, LT, LTZ, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2010 Chevrolet Tahoe Heat Shield, Front Passenger Side Part Number: 23498620
$61.61 MSRP: $91.69
You Save: $30.08 (33%)
ADD TO CART
Product Specifications
- Other Name: Shield Assembly-Front Body Exhaust Heat; Exhaust Heat Shield; Shield, Exhaust Pipe
- Position: Front Passenger Side
- Replaces: 15804782, 15782417, 15893979, 23120901, 25988380, 15804781, 20883209
- Item Weight: 1.00 Pounds
- Item Dimensions: 49.5 x 5.1 x 16.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23498620
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Tahoe Submodels:
- Hybrid, LS, LT, LTZ, PPV, Premier, SSV | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2010 Chevrolet Tahoe Heat Shield, Rear Driver Side Part Number: 15102076
$23.72 MSRP: $37.11
You Save: $13.39 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield Assembly-Exhaust Heat (At Rear Floor Panel); Exhaust Heat Shield; Shield, Exhaust Tail Pipe
- Position: Rear Driver Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.4 x 11.6 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15102076
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Tahoe Submodels:
- Hybrid, LS, LT, LTZ, PPV, Premier, SSV | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2010 Chevrolet Tahoe Heat Shield Part Number: 22869576
$15.75 MSRP: $23.44
You Save: $7.69 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield, Exhaust Tail Pipe; Exhaust Heat Shield
- Replaces: 15814468, 15740776
- Item Weight: 1.20 Pounds
- Item Dimensions: 40.0 x 15.6 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22869576
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Tahoe Submodels:
- LS, LT, LTZ, PPV, Premier, SSV | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2010 Chevrolet Tahoe Heat Shield, Driver Side Part Number: 12562243
Product Specifications
- Other Name: Shield, Exhaust Manifold; Exhaust Heat Shield
- Position: Driver Side
- Item Weight: 1.00 Pounds
- Item Dimensions: 9.2 x 3.4 x 20.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12562243
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Tahoe Submodels:
- Base, Hybrid, LS, LT, LTZ, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2010 Chevrolet Tahoe Heat Shield, Passenger Side Part Number: 25848478
Product Specifications
- Other Name: Shield-Exhaust Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Passenger Side
- Replaces: 10388867, 15797116
- Item Weight: 0.70 Pounds
- Item Dimensions: 9.7 x 9.3 x 11.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25848478
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Tahoe Submodels:
- Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2010 Chevrolet Tahoe Heat Shield Part Number: 15291251
Product Specifications
- Other Name: Shield, Exhaust Tail Pipe; Exhaust Heat Shield
- Item Weight: 1.70 Pounds
- Item Dimensions: 40.3 x 15.2 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15291251
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Tahoe Submodels:
- Hybrid | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
View related parts
2010 Chevrolet Tahoe Heat Shield, Driver Side Part Number: 25848476
Product Specifications
- Other Name: Shield-Exhaust Heat; Exhaust Heat Shield; Shield, Exhaust Manifold; Shield, Exhaust Pipe
- Position: Driver Side
- Replaces: 15169247
- Item Weight: 1.30 Pounds
- Item Dimensions: 10.7 x 8.9 x 8.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25848476
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Tahoe Submodels:
- Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS

2010 Chevrolet Tahoe Exhaust Heat Shield

With a comprehensive array of OEM 2010 Chevrolet Tahoe Exhaust Heat Shield, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Tahoe Exhaust Heat Shield are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Tahoe Exhaust Heat Shield Parts and Q&A

Q: How to replace the exhaust heat shield on the dash panel on 2010 Chevrolet Tahoe?
A: The first step to replace the dash panel Exhaust Heat Shield is to lift the vehicle then support it under its frame. First remove all bolts from the engine shield then detach the shield from its position. The removal process begins with extracting oil pan skid plate bolts as well as the skid plate from 1500 series models. The 2500 series requires bolt removal of both rear oil pan skid plate fasteners followed by removing the front oil pan skid plate fasteners and the skid plate if it is installed. The process requires discarding the Catalytic Converter if needed. Remove the dash panel Exhaust Heat Shield nuts (2 or 4) followed by installing the dash panel Exhaust Heat Shield (1 or 3) to the dash panel studs. Install the dash panel Exhaust Heat Shield (1 or 3) to the dash panel studs by tightly securing its nuts (2 or 4) with a torque of 9 nm (80 lb in). Reinstallation of the Catalytic Converter should proceed if required. The installation for 2500 series vehicles begins with placing the oil pan skid plate correctly before tightening the bolt at the rear position to 28 nm (21 lb ft). Additional elements for front bolts may exist which need installation and tightening to 28 nm (21 lb ft) if the vehicle has them. The 1500 series vehicles should have their oil pan skid plate both positioned and bolted with torque set at 28 nm (21 lb ft). Place the engine shield on the frame while installing its bolts to 20 nm (15 lb ft) before the vehicle reaches the ground.