How to replace the Brake Light Switch with adjustable pedals on 2010 Chevrolet Silverado 1500?

To replace brake light switch with adjustable pedals, apply the park brake and remove the driver knee bolster. Disconnect the brake light switch connector, remove the pushrod retainer and slide the pushrod off of the brake pedal pin. Rack everything back up and be sure everything is connected.

OEM 2010 Chevrolet Silverado 1500 Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2010 Chevrolet Silverado 1500 Stoplamp Switch Part Number: 25981009
$65.40 MSRP: $134.40
You Save: $69.00 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Stop Lamp; Brake Light Switch; Switch, Stop Lamp Switch
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.0 x 2.1 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25981009
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 5.3 L FLEX, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.2 L FLEX

2010 Chevrolet Silverado 1500 Brake Light Switch

With a comprehensive array of OEM 2010 Chevrolet Silverado 1500 Brake Light Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Silverado 1500 Brake Light Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Silverado 1500 Brake Light Switch Parts and Q&A

Q: How to replace the Brake Light Switch with adjustable pedals on 2010 Chevrolet Silverado 1500?
A: To replace brake light switch with adjustable pedals, apply the park brake and remove the driver knee bolster. Disconnect the brake light switch connector, remove the pushrod retainer and slide the pushrod off of the brake pedal pin. Rack everything back up and be sure everything is connected.