Other Name: Relay, Capsule/Headlamp/Fog Lamp; Daytime Running Light Relay; Multi Purpose Relay; Fog Light Relay; Fan, Horn, Compressor, Door Locks, Headlamp, Turn Signal, Wiper Motor, Voltage, Glow Plug, Rear Wiper, Fuel Pump.
Item Weight: 0.30 Pounds
Item Dimensions: 1.3 x 1.4 x 0.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 19115081
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2010 Chevrolet Impala Submodels:
50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2010 Chevrolet Impala Submodels:
50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2010 Chevrolet Impala Submodels:
50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
2010 Chevrolet Impala Relay
With a comprehensive array of OEM 2010 Chevrolet Impala Relay, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Impala Relay are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2010 Chevrolet Impala Relay Parts and Q&A
Q: How to replace the relay within the electrical center on 2010 Chevrolet Impala?
A: Before replacing a relay within the electrical center start by removing the electrical center cover to identify the relay position and note its orientation for new relay installation and any notch placement when the relay has notches. Protecting the electrical center from damage is essential because straining wires and terminals can occur during insecure conditions. The J 43244 tool must be positioned on opposing corners of the relay before gently pulling the relay straight out from the electrical center terminals to avoid damaging the electrical center and pliers or flat bladed tools should be avoided. Manual removal of the relay leaves its installation spot available for replacing the new relay before securing the electrical center cover.