How to replace the shock absorber with F55 on 2010 Chevrolet Corvette?

Before beginning f55 Shock Absorber replacement start by disconnecting the front shock esc harness connector while supporting and raising the vehicle. First remove the tire together with the wheel assembly. Note that the esc connector should be sealed onto the upper shock shaft so the Shock Absorber needs replacement if it sustains damage. The technician should use hand tools to eliminate the upper mounting nut while also removing the insulator retainer and insulator before taking out the Shock Absorber lower mounting bolts and nuts. Squeezing the Shock Absorber upward with a pry bar requires the shock support tool (J 43822) prior to Shock Absorber removal from the vehicle. Users should detach the shock support tool (J 43822) from the Shock Absorber to proceed with the removal of the insulator along with its retainer. The first step for installation involves connecting the shock support tool (J 43822) to the Shock Absorber before installing the insulator followed by the insulator retainer. Put the Shock Absorber into position between upper shock support and lower Control Arm then attach the insulator with the retainer piece and upper shock shaft nut while torquing it to 26 nm (19 lb ft). Install the Shock Absorber support tool (J 43822) to the shock unit then compress the coil spring with the transverse spring compressor (J 33432-A) while raising the lower Control Arm toward the Shock Absorber lower joint until you install and tighten the bolts and nuts to 28 nm (21 lb ft). Install the tire and wheel assembly after using transverse spring compressor (J 33432-A) to compress the spring before lowering the car and reconnecting the esc harness connector by checking the connection through gentle upward connector pull.

OEM 2010 Chevrolet Corvette Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Shock Absorbers found

View related parts
2010 Chevrolet Corvette Shock Absorber Part Number: 19302775
$525.19 MSRP: $1019.30
You Save: $494.11 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Kit, Shock; Shock
- Position: Front
- Replaces: 19178739, 19259307
- Item Weight: 5.80 Pounds
- Item Dimensions: 22.2 x 3.5 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19302775
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2010 Chevrolet Corvette Shock Absorber Part Number: 19302774
$561.63 MSRP: $1099.62
You Save: $537.99 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Kit, Shock; Shock
- Position: Front
- Replaces: 19259306, 19207674
- Item Weight: 5.20 Pounds
- Item Dimensions: 3.0 x 3.2 x 22.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19302774
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- Z06, Z06 Carbon | 8 Cyl 7.0 L GAS
View related parts
2010 Chevrolet Corvette Shock Absorber Part Number: 10302855
$143.37 MSRP: $280.70
You Save: $137.33 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber, Shock; Suspension Shock Absorber; Shock
- Position: Front
- Item Weight: 3.30 Pounds
- Item Dimensions: 4.1 x 4.2 x 25.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10302855
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, Base, Grand Sport, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2010 Chevrolet Corvette Shock Absorber Part Number: 10302877
$115.82 MSRP: $224.79
You Save: $108.97 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Suspension Shock Absorber; Shock; Absorber, Shock
- Position: Rear
- Item Weight: 4.20 Pounds
- Item Dimensions: 8.2 x 4.0 x 23.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10302877
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2010 Chevrolet Corvette Shock Absorber Part Number: 10313647
$106.37 MSRP: $189.95
You Save: $83.58 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber, Shock; Suspension Shock Absorber; Shock
- Position: Front
- Item Weight: 4.40 Pounds
- Item Dimensions: 38.2 x 6.7 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10313647
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2010 Chevrolet Corvette Shock Absorber Part Number: 25819268
$101.92 MSRP: $167.28
You Save: $65.36 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber, Shock; Suspension Shock Absorber; Shock
- Position: Front
- Replaces: 10318361
- Item Weight: 4.10 Pounds
- Item Dimensions: 7.1 x 4.2 x 23.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 25819268
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2010 Chevrolet Corvette Shock Absorber, Passenger Side Part Number: 19431687
$573.40 MSRP: $1037.82
You Save: $464.42 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber, Shock; Shock; Absorber, Front And Rear Suspension
- Position: Passenger Side
- Replaces: 22784741, 19177205, 19302779
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19431687
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2010 Chevrolet Corvette Shock Absorber, Rear Driver Side Part Number: 19431688
$508.65 MSRP: $995.88
You Save: $487.23 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Rear Shock; Shock; Absorber, Front And Rear Suspension; Absorber, Shock
- Position: Rear Driver Side
- Replaces: 19302781, 22784743, 19177206
- Item Weight: 6.60 Pounds
- Item Dimensions: 24.2 x 7.3 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19431688
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2010 Chevrolet Corvette Shock, Passenger Side Part Number: 19302778
Product Specifications
- Other Name: Absorber, Shock; Shock Absorber
- Position: Passenger Side
- Replaces: 22784740, 19207063
- Item Weight: 6.60 Pounds
- Item Dimensions: 7.1 x 4.1 x 24.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19302778
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2010 Chevrolet Corvette Shock, Rear Driver Side Part Number: 19302780
Product Specifications
- Other Name: Absorber Assembly, Rear Shock; Shock Absorber; Absorber, Shock
- Position: Rear Driver Side
- Replaces: 19207062, 22784742
- Item Weight: 6.10 Pounds
- Item Dimensions: 7.4 x 4.1 x 25.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19302780
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2010 Chevrolet Corvette Shock Absorber, Rear Passenger Side Part Number: 20830848
Product Specifications
- Other Name: Absorber Assembly-Rear Shock (Right-Hand Proc); Shock; Absorber, Shock
- Position: Rear Passenger Side
- Item Weight: 4.10 Pounds
- Item Dimensions: 4.2 x 4.1 x 23.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 20830848
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

2010 Chevrolet Corvette Shock Absorber

With a comprehensive array of OEM 2010 Chevrolet Corvette Shock Absorber, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Corvette Shock Absorber are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Corvette Shock Absorber Parts and Q&A

Q: How to replace the shock absorber with F55 on 2010 Chevrolet Corvette?
A: Before beginning f55 Shock Absorber replacement start by disconnecting the front shock esc harness connector while supporting and raising the vehicle. First remove the tire together with the wheel assembly. Note that the esc connector should be sealed onto the upper shock shaft so the Shock Absorber needs replacement if it sustains damage. The technician should use hand tools to eliminate the upper mounting nut while also removing the insulator retainer and insulator before taking out the Shock Absorber lower mounting bolts and nuts. Squeezing the Shock Absorber upward with a pry bar requires the shock support tool (J 43822) prior to Shock Absorber removal from the vehicle. Users should detach the shock support tool (J 43822) from the Shock Absorber to proceed with the removal of the insulator along with its retainer. The first step for installation involves connecting the shock support tool (J 43822) to the Shock Absorber before installing the insulator followed by the insulator retainer. Put the Shock Absorber into position between upper shock support and lower Control Arm then attach the insulator with the retainer piece and upper shock shaft nut while torquing it to 26 nm (19 lb ft). Install the Shock Absorber support tool (J 43822) to the shock unit then compress the coil spring with the transverse spring compressor (J 33432-A) while raising the lower Control Arm toward the Shock Absorber lower joint until you install and tighten the bolts and nuts to 28 nm (21 lb ft). Install the tire and wheel assembly after using transverse spring compressor (J 33432-A) to compress the spring before lowering the car and reconnecting the esc harness connector by checking the connection through gentle upward connector pull.