How to Service and Repair a Leaf Spring in the Front Suspension on 2010 Chevrolet Corvette?

The front transverse spring replacement starts by elevating and supporting the vehicle followed by wheel and tire removal. Check the front spring adjuster bolt gap on a transverse spring replacement while avoiding any damage to the spring surface. Hook up the j 33432-a (Leaf Spring Compressor) to compress the transverse spring while you detach the lower shock absorber bolts from one of the lower control arms as well as separating the stabilizer shaft link from the lower Control Arm using safe jackstands to support the lower control arms. The procedure continues with removal of the lower Control Arm from the vehicle followed by the transverse spring bolts and retainers. Retain the old bolts while using new ones on the installation. Depart the transverse spring from the vehicle and the compressor when the spring needs replacement. Mount the j 33432-a (Leaf Spring Compressor) to the transverse spring before installing the assembly to the crossmember but keep the compressor in place until after shock absorber installation because removal during this period causes damage to the assembly. Position the transverse spring retainers together with new bolts into the crossmember before torquing them to 62 nm (46 lb ft). Keep the lower Control Arm stable with a jackstand in place so you can torque the cam bolts without reaching final torque values. Reconnect the lower Control Arm to the front crossmember before installing the shock absorber lower bolts and finally installing the stabilizer shaft link to the lower Control Arm. After removing the j 33432-a (Leaf Spring Compressor) from the transverse spring finish by dismantling jackstands then repositioning the tire and wheel assemblies while performing a front wheel alignment and adjusting front trim height.

OEM 2010 Chevrolet Corvette Leaf Spring

Leaf Helper Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Leaf Springs found

View related parts
2010 Chevrolet Corvette Spring, Rear Part Number: 25962579
$356.08 MSRP: $560.26
You Save: $204.18 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs
- Position: Rear
- Item Weight: 11.50 Pounds
- Item Dimensions: 50.2 x 4.4 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25962579
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2010 Chevrolet Corvette Spring, Rear Part Number: 15233390
$340.61 MSRP: $535.93
You Save: $195.32 (37%)
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs
- Position: Rear
- Item Weight: 11.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15233390
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2010 Chevrolet Corvette Spring, Rear Part Number: 15233388
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs
- Position: Rear
- Item Weight: 10.60 Pounds
- Item Dimensions: 48.5 x 5.3 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15233388
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2010 Chevrolet Corvette Spring, Rear Part Number: 15233392
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs
- Position: Rear
- Item Weight: 11.30 Pounds
- Item Dimensions: 49.6 x 4.6 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15233392
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2010 Chevrolet Corvette Spring, Rear Part Number: 25992252
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs
- Position: Rear
- Item Weight: 11.50 Pounds
- Item Dimensions: 48.3 x 4.7 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25992252
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2010 Chevrolet Corvette Spring, Rear Part Number: 15233386
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs
- Position: Rear
- Item Weight: 11.00 Pounds
- Item Dimensions: 48.3 x 4.8 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15233386
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2010 Chevrolet Corvette Spring, Rear Part Number: 25962580
$357.80 MSRP: $562.99
You Save: $205.19 (37%)
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs
- Position: Rear
- Replaces: 15233389
- Item Weight: 11.50 Pounds
- Item Dimensions: 48.3 x 4.3 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25962580
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

2010 Chevrolet Corvette Leaf Spring

With a comprehensive array of OEM 2010 Chevrolet Corvette Leaf Spring, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Corvette Leaf Spring are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Corvette Leaf Spring Parts and Q&A

Q: How to Service and Repair a Leaf Spring in the Front Suspension on 2010 Chevrolet Corvette?
A: The front transverse spring replacement starts by elevating and supporting the vehicle followed by wheel and tire removal. Check the front spring adjuster bolt gap on a transverse spring replacement while avoiding any damage to the spring surface. Hook up the j 33432-a (Leaf Spring Compressor) to compress the transverse spring while you detach the lower shock absorber bolts from one of the lower control arms as well as separating the stabilizer shaft link from the lower Control Arm using safe jackstands to support the lower control arms. The procedure continues with removal of the lower Control Arm from the vehicle followed by the transverse spring bolts and retainers. Retain the old bolts while using new ones on the installation. Depart the transverse spring from the vehicle and the compressor when the spring needs replacement. Mount the j 33432-a (Leaf Spring Compressor) to the transverse spring before installing the assembly to the crossmember but keep the compressor in place until after shock absorber installation because removal during this period causes damage to the assembly. Position the transverse spring retainers together with new bolts into the crossmember before torquing them to 62 nm (46 lb ft). Keep the lower Control Arm stable with a jackstand in place so you can torque the cam bolts without reaching final torque values. Reconnect the lower Control Arm to the front crossmember before installing the shock absorber lower bolts and finally installing the stabilizer shaft link to the lower Control Arm. After removing the j 33432-a (Leaf Spring Compressor) from the transverse spring finish by dismantling jackstands then repositioning the tire and wheel assemblies while performing a front wheel alignment and adjusting front trim height.