How to replace the Crankshaft Position Sensor on 2010 Chevrolet Cobalt?

First of all, remove the starter to replace the Crankshaft Position Sensor. Take off the engine wiring harness CKP sensor, then take off the sensor and bolt. Apply clean engine oil to the O-ring seal, reconnect the sensor and bolt. Install the starter and reconnect the wiring harness.

OEM 2010 Chevrolet Cobalt Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
2010 Chevrolet Cobalt Crankshaft Position Sensor, Green Line Part Number: 12588992
$33.33 MSRP: $62.60
You Save: $29.27 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaced by: 12674703
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.1 x 2.3 x 1.1 inches
- Condition: New
- SKU: 12588992
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

2010 Chevrolet Cobalt Crankshaft Position Sensor

With a comprehensive array of OEM 2010 Chevrolet Cobalt Crankshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Cobalt Crankshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Cobalt Crankshaft Position Sensor Parts and Q&A

Q: How to replace the Crankshaft Position Sensor on 2010 Chevrolet Cobalt?
A: First of all, remove the starter to replace the Crankshaft Position Sensor. Take off the engine wiring harness CKP sensor, then take off the sensor and bolt. Apply clean engine oil to the O-ring seal, reconnect the sensor and bolt. Install the starter and reconnect the wiring harness.