How to replace the blower motor on 2010 Chevrolet Camaro?

To replace the blower motor, remove the instrument panel compartment assembly and the screws from the glove box opening. Take out the right side floor heater duct, then the blower motor cover. Cut through the HVAC module case to remove the motor. Clean the edges, attach the blower service ring, and reinstall the components.

OEM 2010 Chevrolet Camaro Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor found

View related parts
2010 Chevrolet Camaro Blower Motor Part Number: 23438987
$87.99 MSRP: $165.24
You Save: $77.25 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Kit, Air Conditioner Evaporator Blower; HVAC Blower Motor; Blower Assembly; Motor Kit, A/C Evaporator Blower; Motor Kit, Heater Blower Motor
- Replaces: 92215203, 22762719
- Item Weight: 3.10 Pounds
- Item Dimensions: 9.7 x 9.5 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23438987
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Camaro Submodels:
- LS, LT, SS, Z/28, ZL1 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

2010 Chevrolet Camaro Blower Motor

With a comprehensive array of OEM 2010 Chevrolet Camaro Blower Motor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Camaro Blower Motor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Camaro Blower Motor Parts and Q&A

Q: How to replace the blower motor on 2010 Chevrolet Camaro?
A: To replace the blower motor, remove the instrument panel compartment assembly and the screws from the glove box opening. Take out the right side floor heater duct, then the blower motor cover. Cut through the HVAC module case to remove the motor. Clean the edges, attach the blower service ring, and reinstall the components.