How to replace the Engine Coolant Temperature Sensor (ECT 2) on 2010 Chevrolet Aveo?

In order to replace the engine Coolant Temperature Sensor (ECT 2), disconnect the battery negative cable first. Drain the engine coolant, after which remove the ect 2 sensor connector, and the ect 2 sensor from the Radiator. For installation, firmly attach the ect 2 sensor to the Radiator, tightening it to 20 nm (15 lb ft), and re-attach the ect 2 sensor connector sunscreen. Top up the engine coolant and lastly join the battery negative cable.

OEM 2010 Chevrolet Aveo Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Temperature Sensor found

View related parts
2010 Chevrolet Aveo Coolant Temperature Sensor Part Number: 96476965
$24.27 MSRP: $39.97
You Save: $15.70 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Engine Coolant Temperature; Temperature Sensor; Sensor, Coolant Temperature (Engine Unit)
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.1 x 2.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96476965
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS

2010 Chevrolet Aveo Coolant Temperature Sensor

With a comprehensive array of OEM 2010 Chevrolet Aveo Coolant Temperature Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Aveo Coolant Temperature Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Aveo Coolant Temperature Sensor Parts and Q&A

Q: How to replace the Engine Coolant Temperature Sensor (ECT 2) on 2010 Chevrolet Aveo?
A: In order to replace the engine Coolant Temperature Sensor (ECT 2), disconnect the battery negative cable first. Drain the engine coolant, after which remove the ect 2 sensor connector, and the ect 2 sensor from the Radiator. For installation, firmly attach the ect 2 sensor to the Radiator, tightening it to 20 nm (15 lb ft), and re-attach the ect 2 sensor connector sunscreen. Top up the engine coolant and lastly join the battery negative cable.