How to replace the Radio Antenna Module in a Notchback on 2010 Chevrolet Aveo?

To remove the radio Antenna module of a notchback, remove the negative Battery Cable first. Remove the rear quarter upper trim panel (Without neglecting the procedures that would be followed to replace it for the specific type of the vehicle). Having removed the screws, remove the Antenna module that comes on a glass windshield. To install, screw the new glass Antenna module tightly into place using screws and tighten them to 2.5-3.5 nm (22-31 lb in), and attach the electrical connectors. Lastly, replace the rear quarter upper trim panel and reconnect the negative Battery Cable.

OEM 2010 Chevrolet Aveo Antenna

Radio Antenna

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Antenna found

View related parts
2010 Chevrolet Aveo Antenna Mast Part Number: 10370211
$43.66 MSRP: $85.50
You Save: $41.84 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Antenna, Radio; Antenna; Mast; Antenna, Power Radio Antenna; Antenna, Radio Antenna
- Item Weight: 0.40 Pounds
- Item Dimensions: 8.6 x 1.2 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10370211
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS

2010 Chevrolet Aveo Antenna

With a comprehensive array of OEM 2010 Chevrolet Aveo Antenna, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Aveo Antenna are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Aveo Antenna Parts and Q&A

Q: How to replace the Radio Antenna Module in a Notchback on 2010 Chevrolet Aveo?
A: To remove the radio Antenna module of a notchback, remove the negative Battery Cable first. Remove the rear quarter upper trim panel (Without neglecting the procedures that would be followed to replace it for the specific type of the vehicle). Having removed the screws, remove the Antenna module that comes on a glass windshield. To install, screw the new glass Antenna module tightly into place using screws and tighten them to 2.5-3.5 nm (22-31 lb in), and attach the electrical connectors. Lastly, replace the rear quarter upper trim panel and reconnect the negative Battery Cable.