How to replace the rear output transfer case seal on 2010 Cadillac Escalade?

The replacement process of the rear output shaft seal starts by properly supporting and lifting the vehicle. Begin by taking off the transfer case shield only when present and then the rear propeller shaft. A flat-tipped screwdriver allows the removal of the rear output shaft seal through prying action. The output shaft seal installer (J 45756) should be used for installing a new front output shaft seal. Finally, reinstall the rear propeller shaft followed by a check of the fluid level and necessary fluid addition. Reinstallation of the transfer case shield takes place only when present before lowering the vehicle to an upright position.

OEM 2010 Cadillac Escalade Transfer Case Seal

Transfer Case Output Shaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Transfer Case Seal found

View related parts
2010 Cadillac Escalade Extension Housing Seal Part Number: 24262196
$3.04 MSRP: $4.75
You Save: $1.71 (36%)
Product Specifications
- Other Name: Gasket-Automatic Transmission Case Extension; Automatic Transmission Extension Housing Seal; Transmission Seal; Gasket, Transmission Extension
- Replaces: 29544371
- Item Weight: 0.30 Pounds
- Item Dimensions: 8.3 x 8.3 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24262196
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac Escalade Submodels:
- Hybrid, Hybrid Platinum | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)

2010 Cadillac Escalade Transfer Case Seal

With a comprehensive array of OEM 2010 Cadillac Escalade Transfer Case Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Cadillac Escalade Transfer Case Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Cadillac Escalade Transfer Case Seal Parts and Q&A

Q: How to replace the rear output transfer case seal on 2010 Cadillac Escalade?
A: The replacement process of the rear output shaft seal starts by properly supporting and lifting the vehicle. Begin by taking off the transfer case shield only when present and then the rear propeller shaft. A flat-tipped screwdriver allows the removal of the rear output shaft seal through prying action. The output shaft seal installer (J 45756) should be used for installing a new front output shaft seal. Finally, reinstall the rear propeller shaft followed by a check of the fluid level and necessary fluid addition. Reinstallation of the transfer case shield takes place only when present before lowering the vehicle to an upright position.