How to replace the brake fluid level sensor on 2010 Buick Lucerne?

In order to change the Brake Fluid Level Indicator Switch, unconnect the electrical connector to the sensor. Insert a needle nose pliers to press tabs on the retention and take out the sensor in the reservoir. To install, position the sensor with the master cylinder reservoir and firmly press it into place and reconnect the electrical connector.

OEM 2010 Buick Lucerne Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Fluid Level Sensor found

View related parts
2010 Buick Lucerne Level Sensor Part Number: 22672096
$59.69 MSRP: $116.85
You Save: $57.16 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Brake Fluid Level Indicator; Level Indicator; Fluid Level Sensor; Fluid Sensor; Fluid Level Switch; Switch, Brake Master Cylinder Reservoir
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.2 x 1.4 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22672096
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, Super | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS

2010 Buick Lucerne Brake Fluid Level Sensor

With a comprehensive array of OEM 2010 Buick Lucerne Brake Fluid Level Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Buick Lucerne Brake Fluid Level Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Buick Lucerne Brake Fluid Level Sensor Parts and Q&A

Q: How to replace the brake fluid level sensor on 2010 Buick Lucerne?
A: In order to change the Brake Fluid Level Indicator Switch, unconnect the electrical connector to the sensor. Insert a needle nose pliers to press tabs on the retention and take out the sensor in the reservoir. To install, position the sensor with the master cylinder reservoir and firmly press it into place and reconnect the electrical connector.