How to replace the Center Console for a small car with a manual transmission on 2009 GMC Canyon?

For sp, to change console for a small car with a manual, first, need to remove retaining strips from the shift lever boot and also remove inside rear seat track bolts from both front seats. Push up the console to release 4 retainers then take the console out from the vehicle. For installation, place the console to the floor panel with the retainers indexed in the corresponding holes of the floor panel and press down on the console to install the retainers. Be careful with fasteners to prevent vehicle damage and then bolt in seat track bolts for the front seats and tighten them to 53 nm (39 lb ft) and finally add the retaining strips on shift lever bezel.

OEM 2009 GMC Canyon Center Console

Floor Console Assembly

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Center Consoles found

View related parts
2009 GMC Canyon Console Body, Front Part Number: 19149639
Product Specifications
- Other Name: Console Assembly, Front Floor *Ebony; Console, Seat Separator Console
- Position: Front
- Item Weight: 10.80 Pounds
- Item Dimensions: 46.5 x 23.4 x 16.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19149639
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Canyon Submodels:
- SL, SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2009 GMC Canyon Console, Front Part Number: 15812678
Product Specifications
- Other Name: Console Assembly-Front Floor *Ebony; Center Console Base; Console, Seat Separator Console
- Position: Front
- Item Weight: 1.60 Pounds
- Item Dimensions: 21.8 x 19.0 x 17.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15812678
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Canyon Submodels:
- SL, SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

2009 GMC Canyon Center Console

With a comprehensive array of OEM 2009 GMC Canyon Center Console, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 GMC Canyon Center Console are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 GMC Canyon Center Console Parts and Q&A

Q: How to replace the Center Console for a small car with a manual transmission on 2009 GMC Canyon?
A: For sp, to change console for a small car with a manual, first, need to remove retaining strips from the shift lever boot and also remove inside rear seat track bolts from both front seats. Push up the console to release 4 retainers then take the console out from the vehicle. For installation, place the console to the floor panel with the retainers indexed in the corresponding holes of the floor panel and press down on the console to install the retainers. Be careful with fasteners to prevent vehicle damage and then bolt in seat track bolts for the front seats and tighten them to 53 nm (39 lb ft) and finally add the retaining strips on shift lever bezel.