How to replace the rear window wiper motor on 2009 Chevrolet Trailblazer?

For the replacement of the rear window Wiper Motor on the trailblazer or envoy, remove the Wiper Arm at first. Next, remove the nut and spacer from the Wiper Motor shaft then remove the interior trim panel from the liftgate. Disconnect the Wiper Motor electrical connector and remove 2 bolts which secure Wiper Motor to the lift gate to remove the Wiper Motor. For installation, place the new Wiper Motor and seal it using the 2 bolts tightening them with 8 nm (71 lb in). Reconnect the Wiper Motor electrical connector, and reinstall the interior trim panel, and then put spacer and nut on the Wiper Motor drive shaft, tighten the nut to 8 nm (71 lb in). Finally, reinstall the Wiper Arm.

OEM 2009 Chevrolet Trailblazer Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wiper Motors found

View related parts
2009 Chevrolet Trailblazer Wiper Motor, Rear Part Number: 25805561
Product Specifications
- Other Name: Motor, Rear Window Wiper; Rear Motor; Motor, Rear Window Wiper/Washer
- Position: Rear
- Replaces: 15198956, 12487694, 15094706, 15229806
- Item Weight: 3.30 Pounds
- Item Dimensions: 8.5 x 8.4 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25805561
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Trailblazer Submodels:
- Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2009 Chevrolet Trailblazer Motor & Linkage Part Number: 19355989
Product Specifications
- Other Name: Module; Wiper Motor; Front Motor; Module, Windshield Wiper Motor
- Replaces: 12487687, 12487688, 15094705, 15812054, 15214344, 88958236
- Item Weight: 9.00 Pounds
- Item Dimensions: 37.1 x 7.3 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19355989
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Trailblazer Submodels:
- Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2009 Chevrolet Trailblazer Motor & Linkage Part Number: 19354908
$192.90 MSRP: $346.00
You Save: $153.10 (45%)
Product Specifications
- Other Name: Module; Front Motor; Cover; Module, Windshield Wiper Motor
- Replaces: 15878429, 88958237, 15094704, 12487689, 15812497, 15214343, 12487690
- Item Weight: 10.70 Pounds
- Item Dimensions: 36.7 x 7.4 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19354908
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Trailblazer Submodels:
- Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2009 Chevrolet Trailblazer Wiper Motor

With a comprehensive array of OEM 2009 Chevrolet Trailblazer Wiper Motor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Trailblazer Wiper Motor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Trailblazer Wiper Motor Parts and Q&A

Q: How to replace the rear window wiper motor on 2009 Chevrolet Trailblazer?
A: For the replacement of the rear window Wiper Motor on the trailblazer or envoy, remove the Wiper Arm at first. Next, remove the nut and spacer from the Wiper Motor shaft then remove the interior trim panel from the liftgate. Disconnect the Wiper Motor electrical connector and remove 2 bolts which secure Wiper Motor to the lift gate to remove the Wiper Motor. For installation, place the new Wiper Motor and seal it using the 2 bolts tightening them with 8 nm (71 lb in). Reconnect the Wiper Motor electrical connector, and reinstall the interior trim panel, and then put spacer and nut on the Wiper Motor drive shaft, tighten the nut to 8 nm (71 lb in). Finally, reinstall the Wiper Arm.