How to replace the steering linkage inner tie rod in a hydraulic power steering system on 2009 Chevrolet Silverado 1500?

Begin the replacement of a hydraulic power steering inner Tie Rod by taking off the boot from the steering gear then examining the rod for deterioration and contamination. Replace the gear when you find problems. A pipe wrench should be applied to the steering gear rack located next to the steering linkage inner Tie Rod housing while using another wrench on the inner Tie Rod housing flats. Apply counterclockwise rotation to the housing while stabilizing the steering gear rack until it detaches from the rack. Particularly for inner Tie Rod threads make sure to remove all dirt before applying loctite(R) 262. The installation of the steering linkage inner Tie Rod onto the steering gear rack needs support from a pipe wrench on the rack section adjacent to the housing. Install the inner Tie Rod housing with a torque of 150 nm to 111 lb ft before reinstalling the steering gear boot.

OEM 2009 Chevrolet Silverado 1500 Tie Rod

Steering Tie Rod

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Tie Rods found

View related parts
2009 Chevrolet Silverado 1500 Outer Tie Rod Part Number: 15895646
$61.10 MSRP: $149.08
You Save: $87.98 (60%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Tie Rod Outer; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
- Position: Outer
- Item Weight: 1.60 Pounds
- Item Dimensions: 9.7 x 8.1 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15895646
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Silverado 1500 Submodels:
- Hybrid | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
View related parts
2009 Chevrolet Silverado 1500 Outer Tie Rod Part Number: 19352244
$97.05 MSRP: $165.23
You Save: $68.18 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
- Position: Outer
- Replaced by: 85819772
- Item Weight: 1.50 Pounds
- Item Dimensions: 5.9 x 2.8 x 10.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19352244
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Silverado 1500 Submodels:
- Base, Hybrid, LS, LT, LTZ, SS, WT, XFE, Z71 Off-Road | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2009 Chevrolet Silverado 1500 Inner Tie Rod Part Number: 19178561
$68.70 MSRP: $116.97
You Save: $48.27 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Linkage Inner Tie; Steering Tie Rod End; Steering Tie Rod; Tie Rod End; Rod Kit, Steering Tie Rod Inner
- Position: Inner
- Replaces: 15254060
- Item Weight: 2.90 Pounds
- Item Dimensions: 3.7 x 3.7 x 14.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19178561
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2009 Chevrolet Silverado 1500 Outer Tie Rod Part Number: 15254061
$153.54 MSRP: $261.39
You Save: $107.85 (42%)
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Item Weight: 1.60 Pounds
- Item Dimensions: 6.2 x 5.4 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15254061
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2009 Chevrolet Silverado 1500 Inner Tie Rod Part Number: 15895647
Product Specifications
- Other Name: Rod Kit, Steering Tie Rod Inner; Steering Tie Rod End; Tie Rod End
- Position: Inner
- Item Weight: 1.30 Pounds
- Item Dimensions: 16.3 x 3.5 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15895647
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Silverado 1500 Submodels:
- Hybrid | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)

2009 Chevrolet Silverado 1500 Tie Rod

With a comprehensive array of OEM 2009 Chevrolet Silverado 1500 Tie Rod, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Silverado 1500 Tie Rod are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Silverado 1500 Tie Rod Parts and Q&A

Q: How to replace the steering linkage inner tie rod in a hydraulic power steering system on 2009 Chevrolet Silverado 1500?
A: Begin the replacement of a hydraulic power steering inner Tie Rod by taking off the boot from the steering gear then examining the rod for deterioration and contamination. Replace the gear when you find problems. A pipe wrench should be applied to the steering gear rack located next to the steering linkage inner Tie Rod housing while using another wrench on the inner Tie Rod housing flats. Apply counterclockwise rotation to the housing while stabilizing the steering gear rack until it detaches from the rack. Particularly for inner Tie Rod threads make sure to remove all dirt before applying loctite(R) 262. The installation of the steering linkage inner Tie Rod onto the steering gear rack needs support from a pipe wrench on the rack section adjacent to the housing. Install the inner Tie Rod housing with a torque of 150 nm to 111 lb ft before reinstalling the steering gear boot.