How to replace the canister purge valves on 2009 Chevrolet Malibu?

Start replacement of the evaporative emission canister purge solenoid valve by removing the air cleaner outlet duct. Begin by removing the generator battery control module cover when needed. The procedure starts with discarding the engine wiring harness connector from the evap canister purge solenoid valve then moving to the disconnect process of both quick connect fittings from chassis and engine evap lines. Begin by unbolt first the evap canister purge valve bracket bolt then remove its bracket before splitting the valve free from the bracket. Check the evap canister purge valve ports to confirm no carbon leaks occur. Replace the evap canister along with its necessary components when loose carbon is detected in order to eliminate carbon particles. Follow these steps for installation: position the evap canister purge valve with its bracket to the Cylinder Head before tightening the bracket bolt to 25 nm (18 lb ft). Connect the engine evap quick connect fitting to the solenoid valve first and then proceed with the chassis evap quick connect fitting attachment. First reconnect the solenoid valve's wiring harness electrical connector from the engine harness and reinstall the generator battery control module cover (if needed) before installing the air cleaner outlet duct.

OEM 2009 Chevrolet Malibu Canister Purge Valves

Fuel Tank Evaporator Purge Control Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Canister Purge Valves found

View related parts
2009 Chevrolet Malibu PCV Valve Part Number: 12608378
$31.84 MSRP: $59.80
You Save: $27.96 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve, Evaporator Emission Canister Purge Solenoid; Purge Valve; Purge Solenoid; Purge Control Valve
- Replaced by: 12735400
- Item Weight: 0.60 Pounds
- Item Dimensions: 9.5 x 7.3 x 5.1 inches
- Condition: New
- SKU: 12608378
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Malibu Submodels:
- Classic LS, Classic LT, LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2009 Chevrolet Malibu Solenoid Valve, Green Line Part Number: 12597567
$33.29 MSRP: $67.60
You Save: $34.31 (51%)
ADD TO CART
Product Specifications
- Other Name: Valve, Fuel Tank Evaporator/Purge Control; Vapor Canister Purge and Vent Solenoids; Purge Valve; Purge Valve; Purge Solenoid; Purge Control Valve; Solenoid
- Replaced by: 12735397
- Replaces: 12606684, 12597566, 12570469, 12597341
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.2 x 2.0 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12597567
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Malibu Submodels:
- Base, Classic LS, Eco, Hybrid, LS, LT, LTZ | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
2009 Chevrolet Malibu Solenoid Valve, Green Line Part Number: 13575701
$32.99 MSRP: $61.96
You Save: $28.97 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Solenoid, Evaporator Emission Canister; Vapor Canister Vent Solenoid; Vent Control Solenoid; Solenoid; Solenoid, Fuel Tank Evaporator/Purge Control
- Replaces: 10382104, 25932570
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.2 x 4.0 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 13575701
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Malibu Submodels:
- Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
View related parts
2009 Chevrolet Malibu Purge Valve Part Number: 19432443
$50.06 MSRP: $101.68
You Save: $51.62 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Assembly, Evaporator Emission Canister Purge Solenoid; Purge Control Valve; Valve, Fuel Tank Evaporator/Purge Control
- Replaces: 12611800, 12604955
- Condition: New
- SKU: 19432443
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2009 Chevrolet Malibu Submodels:
- LT, LTZ | 6 Cyl 3.6 L GAS

2009 Chevrolet Malibu Canister Purge Valves

With a comprehensive array of OEM 2009 Chevrolet Malibu Canister Purge Valves, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Malibu Canister Purge Valves are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Malibu Canister Purge Valves Parts and Q&A

Q: How to replace the canister purge valves on 2009 Chevrolet Malibu?
A: Start replacement of the evaporative emission canister purge solenoid valve by removing the air cleaner outlet duct. Begin by removing the generator battery control module cover when needed. The procedure starts with discarding the engine wiring harness connector from the evap canister purge solenoid valve then moving to the disconnect process of both quick connect fittings from chassis and engine evap lines. Begin by unbolt first the evap canister purge valve bracket bolt then remove its bracket before splitting the valve free from the bracket. Check the evap canister purge valve ports to confirm no carbon leaks occur. Replace the evap canister along with its necessary components when loose carbon is detected in order to eliminate carbon particles. Follow these steps for installation: position the evap canister purge valve with its bracket to the Cylinder Head before tightening the bracket bolt to 25 nm (18 lb ft). Connect the engine evap quick connect fitting to the solenoid valve first and then proceed with the chassis evap quick connect fitting attachment. First reconnect the solenoid valve's wiring harness electrical connector from the engine harness and reinstall the generator battery control module cover (if needed) before installing the air cleaner outlet duct.