How to replace the Mass Air Flow Sensor with the Intake Air Temperature Sensor on 2009 Chevrolet Impala?

In order to substitute the Mass Air Flow Sensor with Intake Air Temperature Sensor, take out the air cleaner outlet duct. Disassemble the electrical connector and the bolts of the sensor then remove the sensor. In case of necessity, screw on the sensor seal, align the sensor in the back, screw on the bolts, connect the electrical connector again and screw the duct.

OEM 2009 Chevrolet Impala Mass Air Flow Sensor

MAF Sensor Meter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Mass Air Flow Sensor found

View related parts
2009 Chevrolet Impala Mass Air Flow Sensor Part Number: 19351887
Product Specifications
- Other Name: Sensor Assembly, Mass Airflow; Air Mass Sensor
- Replaces: 10349461, 15911983, 19330124
- Item Weight: 2.30 Pounds
- Item Dimensions: 5.3 x 5.5 x 6.4 inches
- Condition: New
- SKU: 19351887
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Impala Submodels:
- 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2009 Chevrolet Impala Mass Air Flow Sensor

With a comprehensive array of OEM 2009 Chevrolet Impala Mass Air Flow Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Impala Mass Air Flow Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Impala Mass Air Flow Sensor Parts and Q&A

Q: How to replace the Mass Air Flow Sensor with the Intake Air Temperature Sensor on 2009 Chevrolet Impala?
A: In order to substitute the Mass Air Flow Sensor with Intake Air Temperature Sensor, take out the air cleaner outlet duct. Disassemble the electrical connector and the bolts of the sensor then remove the sensor. In case of necessity, screw on the sensor seal, align the sensor in the back, screw on the bolts, connect the electrical connector again and screw the duct.