How to replace the catalytic converter (LAP) (2.2L) on 2009 Chevrolet Cobalt?

The first step to install a new lap (2.2L) Catalytic Converter is to lift your vehicle onto a support device. The first step involves removing the wheel drive shaft heat shield and heated Oxygen Sensor (HO2S) after that. You must detach the Catalytic Converter from its connections to the resonator pipe and Exhaust Manifold after removing their responsible nuts to extract the Catalytic Converter. Remove the exhaust gaskets from the system before cleaning both mating surfaces free of remaining gasket material. You should install a new gasket on the resonator pipe studs before fastening the Catalytic Converter to the pipe using 30 nm (22 lb ft) torque. Place back both the (HO2S) and the wheel drive shaft heat shield into its proper position. An inspection of the entire exhaust system for leaks undergoes completion.

OEM 2009 Chevrolet Cobalt Catalytic Converter

Cat. Converter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Catalytic Converters found

View related parts
2009 Chevrolet Cobalt Catalytic Converter Part Number: 19418953
$1519.64 MSRP: $2487.99
You Save: $968.35 (39%)
ADD TO CART
Product Specifications
- Other Name: Converter Assembly, 3Way Catalytic (W/Exhaust Manifold Pipe) "Kit"; Converter & Pipe; Converter, Catalytic Converter; Converter, Exhaust Pipe
- Replaces: 15889902, 22939743
- Condition: New
- SKU: 19418953
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2009 Chevrolet Cobalt Submodels:
- Base, LS, LT, Sport | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Chevrolet Cobalt Catalytic Converter Part Number: 22939742
$1248.81 MSRP: $1870.90
You Save: $622.09 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Assembly-3Way Catalytic (W/Exhaust Manifold P; Exhaust Pipe; Converter & Pipe; Converter, Catalytic Converter; Converter, Exhaust Pipe
- Replaces: 15889901
- Item Weight: 15.20 Pounds
- Item Dimensions: 38.6 x 9.7 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22939742
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Cobalt Submodels:
- Base, LS, LT, Sport | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Chevrolet Cobalt Catalytic Converter Part Number: 25816005
$1960.53 MSRP: $4762.48
You Save: $2801.95 (59%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Assembly-3Way Catalytic (W/Exhaust Manifold P; Exhaust Pipe; Converter & Pipe; Converter, Catalytic Converter; Converter, Exhaust Pipe
- Item Weight: 15.50 Pounds
- Item Dimensions: 33.7 x 14.2 x 8.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25816005
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Cobalt Submodels:
- SS | 4 Cyl 2.0 L GAS

2009 Chevrolet Cobalt Catalytic Converter

With a comprehensive array of OEM 2009 Chevrolet Cobalt Catalytic Converter, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Cobalt Catalytic Converter are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Cobalt Catalytic Converter Parts and Q&A

Q: How to replace the catalytic converter (LAP) (2.2L) on 2009 Chevrolet Cobalt?
A: The first step to install a new lap (2.2L) Catalytic Converter is to lift your vehicle onto a support device. The first step involves removing the wheel drive shaft heat shield and heated Oxygen Sensor (HO2S) after that. You must detach the Catalytic Converter from its connections to the resonator pipe and Exhaust Manifold after removing their responsible nuts to extract the Catalytic Converter. Remove the exhaust gaskets from the system before cleaning both mating surfaces free of remaining gasket material. You should install a new gasket on the resonator pipe studs before fastening the Catalytic Converter to the pipe using 30 nm (22 lb ft) torque. Place back both the (HO2S) and the wheel drive shaft heat shield into its proper position. An inspection of the entire exhaust system for leaks undergoes completion.