How to replace the MAP Sensor on 2009 Chevrolet Aveo?

Firstly, disconnect the negative Battery Cable before changing the manifold absolute pressure sensor. Then, disconnect the electrical connector of the MAP Sensor and the vacuum hose. Next, unscrew the bolt of the MAP Sensor and remove it. For installation, fix the MAP Sensor using the bolt and tighten it 10 nm (89 lb in). After that reconnect the vacuum hose, and the electrical connector from the MAP Sensor, also re-connecht the negative Battery Cable, and when everything is reconnected then start the vehicle.

OEM 2009 Chevrolet Aveo MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2009 Chevrolet Aveo M.A.P. Sensor Part Number: 55573248
$27.69 MSRP: $45.61
You Save: $17.92 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control; Air Pressure Sensor; Height Adaptation; Manifold Absolute Pressure Sensor; MAP Sensor; Ignition Module; Sensor; Sensor, Turbocharger/Supercharger
- Replaces: 12591290, 93192107
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.7 x 2.2 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55573248
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS

2009 Chevrolet Aveo MAP Sensor

With a comprehensive array of OEM 2009 Chevrolet Aveo MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Aveo MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Aveo MAP Sensor Parts and Q&A

Q: How to replace the MAP Sensor on 2009 Chevrolet Aveo?
A: Firstly, disconnect the negative Battery Cable before changing the manifold absolute pressure sensor. Then, disconnect the electrical connector of the MAP Sensor and the vacuum hose. Next, unscrew the bolt of the MAP Sensor and remove it. For installation, fix the MAP Sensor using the bolt and tighten it 10 nm (89 lb in). After that reconnect the vacuum hose, and the electrical connector from the MAP Sensor, also re-connecht the negative Battery Cable, and when everything is reconnected then start the vehicle.