How to replace the lash adjuster on the right side on 2009 Cadillac XLR?

Start by taking off the right valve rocker arms from the right side then keep each camshaft follower exactly where the original stationary hydraulic Lash Adjuster (Lash Adjuster) was positioned originally. Clean and inspect the valley lifters while performing the removal of Lash Adjuster from right cylinder head bores. Insert the Crankshaft to the top dead center (TDC) position on cylinder number one before you fill the Lash Adjuster with fresh engine oil. Be very cautious to avoid damaging the pivot sphere area of the Lash Adjuster. Help the Lash Adjuster bores on the cylinder head accept clean engine oil before sliding the bores inside and putting back the right valve rocker arms.

OEM 2009 Cadillac XLR Lash Adjuster

Lash Adjuster Lifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Lash Adjuster found

View related parts
2009 Cadillac XLR Valve Lifters, Green Line Part Number: 12686787
$14.33 MSRP: $23.63
You Save: $9.30 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Adjuster Assembly-Hydraulic Valve Lash; Filler Cap O-Ring; Adjuster, Engine Valve Lifter; Adjuster, Engine Valve
- Replaces: 12572638, 24100005
- Condition: New
- SKU: 12686787
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2009 Cadillac XLR Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

2009 Cadillac XLR Lash Adjuster

With a comprehensive array of OEM 2009 Cadillac XLR Lash Adjuster, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Cadillac XLR Lash Adjuster are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Cadillac XLR Lash Adjuster Parts and Q&A

Q: How to replace the lash adjuster on the right side on 2009 Cadillac XLR?
A: Start by taking off the right valve rocker arms from the right side then keep each camshaft follower exactly where the original stationary hydraulic Lash Adjuster (Lash Adjuster) was positioned originally. Clean and inspect the valley lifters while performing the removal of Lash Adjuster from right cylinder head bores. Insert the Crankshaft to the top dead center (TDC) position on cylinder number one before you fill the Lash Adjuster with fresh engine oil. Be very cautious to avoid damaging the pivot sphere area of the Lash Adjuster. Help the Lash Adjuster bores on the cylinder head accept clean engine oil before sliding the bores inside and putting back the right valve rocker arms.