How to Safely Handle and Replace the Body Control Module on 2009 Cadillac XLR?

Make sure to turn off the Ignition Switch first when dealing with the Body Control Module (BCM). This stops electrostatic discharge from damaging both the bcm and its internal components. Begin by taking off the curving panel under the right front floor area. You need to take out the 3 bcm retaining screws on the multiuse bracket then detach the wiring links from bcm before taking the unit out from the vehicle. Always turn off the Ignition Switch before beginning the new Body Control Module installation. Attach the harness cords to the bcm unit and put the bcm onto the multiuse bracket. Fasten the 3 retaining screws onto the bcm and tighten them to 2 nm while manually adjusting only after installation is complete. Finally, reinstall the kick-up panel. When putting in a fresh or replacement bcm always sync the device with vehicle data.

OEM 2009 Cadillac XLR Body Control Module

BCM

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Body Control Modules found

View related parts
2009 Cadillac XLR Body Control Module Part Number: 20934684
$218.27 MSRP: $390.00
You Save: $171.73 (45%)
Product Specifications
- Other Name: Module Assembly-Body Control; Module; Module, Body Multi Function Electric Computer; Module, Door Electric And Vacuum Locks
- Replaces: 25832924, 20759656, 25879086
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.3 x 4.2 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20934684
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac XLR Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac XLR Module Part Number: 10348799
Product Specifications
- Other Name: Module, Theft Deterrent Or Front/Rear/Side Object; Module,Theft Deterrent Or Front/Rear/Side/Intake Object
- Position: Rear
- Replaces: 10317519
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.9 x 5.5 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10348799
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac XLR Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

2009 Cadillac XLR Body Control Module

With a comprehensive array of OEM 2009 Cadillac XLR Body Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Cadillac XLR Body Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Cadillac XLR Body Control Module Parts and Q&A

Q: How to Safely Handle and Replace the Body Control Module on 2009 Cadillac XLR?
A: Make sure to turn off the Ignition Switch first when dealing with the Body Control Module (BCM). This stops electrostatic discharge from damaging both the bcm and its internal components. Begin by taking off the curving panel under the right front floor area. You need to take out the 3 bcm retaining screws on the multiuse bracket then detach the wiring links from bcm before taking the unit out from the vehicle. Always turn off the Ignition Switch before beginning the new Body Control Module installation. Attach the harness cords to the bcm unit and put the bcm onto the multiuse bracket. Fasten the 3 retaining screws onto the bcm and tighten them to 2 nm while manually adjusting only after installation is complete. Finally, reinstall the kick-up panel. When putting in a fresh or replacement bcm always sync the device with vehicle data.