How to Replace a Rear Seat Cushion Pad on 2009 Cadillac STS?

The first step for replacing the rear seat back cushion requires removal of the upper trunk trim. Begin by separating the upper retaining nuts attached to the rear seat back and follow this step by taking off the rear seat cushion. The procedure requires removing the center Seat Belt components while detaching the shoulder belt buckle nut and placing the center shoulder belt on the rear shelf panel. Tear off the lower seat back retaining nuts on one hand while pulling out on the top of the rear seat back seat with the other hand until the rear shoulder belts can be removed safely from the seat area. Place the new rear seat back into the vehicle space after you take out the rear seat back. The seat back studs should receive upper retaining nuts which should be tightened to 9 nm (80 lb in). The installation process begins with fitting the upper trunk trim before tightening both rear seat back retaining nuts to 30 nm (22 lb ft). Also verify proper Seat Belt buckles placement and clear bolt threads and holes of sealer patch material. Below the sequence to install the center Seat Belt and shoulder belt buckle anchor nut involves tightening them to 30 nm (22 lb ft) before reinstalling the rear seat cushion.

OEM 2009 Cadillac STS Seat Cushion Pad

Seat Pad Cushion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Seat Cushion Pads found

View related parts
2009 Cadillac STS Seat Back Pad, Front Passenger Side Part Number: 19124828
Product Specifications
- Other Name: Pad, Front Seat Back
- Position: Front Passenger Side
- Replaces: 88994075
- Item Weight: 2.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19124828
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac STS Seat Back Pad Part Number: 88952679
Product Specifications
- Other Name: Pad, Front Seat Back
- Position: Passenger Side
- Item Weight: 2.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88952679
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac STS Seat Back Pad Part Number: 88994074
Product Specifications
- Other Name: Pad Assembly, Driver Seat Back Cushion
- Position: Driver Side
- Item Weight: 2.70 Pounds
- Condition: New
- SKU: 88994074
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2009 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac STS Seat Cushion Pad Part Number: 88952680
Product Specifications
- Other Name: Pad Assembly, Driver Seat Cushion; Pad, Front Seat Cushion; Seat Cushion
- Position: Driver Side
- Item Weight: 2.20 Pounds
- Item Dimensions: 23.6 x 21.0 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88952680
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac STS Seat Cushion Pad Part Number: 88992745
Product Specifications
- Other Name: Pad Assembly, Driver Seat Cushion; Pad, Front Seat Cushion; Seat Cushion
- Position: Driver Side
- Item Weight: 4.00 Pounds
- Item Dimensions: 28.6 x 25.0 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88992745
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac STS Seat Back Pad Part Number: 88952678
Product Specifications
- Other Name: Pad Assembly, Driver Seat Back Cushion
- Position: Driver Side
- Item Weight: 2.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88952678
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac STS Seat Cushion Pad, Rear Part Number: 19123042
Product Specifications
- Other Name: Pad Assembly, Rear Seat Cushion (W/Frame); Pad, Rear Seat Cushion (With Frame); Pad, Rear Seat Cushion; Seat Cushion
- Position: Rear
- Item Weight: 12.70 Pounds
- Item Dimensions: 56.2 x 23.6 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19123042
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac STS Seat Back Pad Part Number: 88949049
Product Specifications
- Other Name: Pad, Rear Seat Back
- Position: Rear
- Item Weight: 3.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88949049
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

2009 Cadillac STS Seat Cushion Pad

With a comprehensive array of OEM 2009 Cadillac STS Seat Cushion Pad, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Cadillac STS Seat Cushion Pad are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Cadillac STS Seat Cushion Pad Parts and Q&A

Q: How to Replace a Rear Seat Cushion Pad on 2009 Cadillac STS?
A: The first step for replacing the rear seat back cushion requires removal of the upper trunk trim. Begin by separating the upper retaining nuts attached to the rear seat back and follow this step by taking off the rear seat cushion. The procedure requires removing the center Seat Belt components while detaching the shoulder belt buckle nut and placing the center shoulder belt on the rear shelf panel. Tear off the lower seat back retaining nuts on one hand while pulling out on the top of the rear seat back seat with the other hand until the rear shoulder belts can be removed safely from the seat area. Place the new rear seat back into the vehicle space after you take out the rear seat back. The seat back studs should receive upper retaining nuts which should be tightened to 9 nm (80 lb in). The installation process begins with fitting the upper trunk trim before tightening both rear seat back retaining nuts to 30 nm (22 lb ft). Also verify proper Seat Belt buckles placement and clear bolt threads and holes of sealer patch material. Below the sequence to install the center Seat Belt and shoulder belt buckle anchor nut involves tightening them to 30 nm (22 lb ft) before reinstalling the rear seat cushion.