How to replace the input shaft transfer case seal on 2008 GMC Yukon?

The replacement process of the input shaft seal begins with transferring case removal. Chipping the seal with a point-shaped tool could make it possible to prepare the j 36825 (J 36825 Output Shaft Oil Seal Remover) for removal. The repair process requires using both j 23907 (J 23907 Slide Hammer with Bearing Adapter) together with j 36825 (J 36825 Output Shaft Oil Seal Remover) to successfully extract the input seal. The j 42738 (J 42738 Front Output Shaft Seal Installer) should be used to install the new input shaft seal followed by reinstallation of the Transfer Case.

OEM 2008 GMC Yukon Transfer Case Seal

Transfer Case Output Shaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Transfer Case Seal found

View related parts
2008 GMC Yukon Extension Housing Seal Part Number: 24262196
$3.04 MSRP: $4.75
You Save: $1.71 (36%)
Product Specifications
- Other Name: Gasket-Automatic Transmission Case Extension; Automatic Transmission Extension Housing Seal; Transmission Seal; Gasket, Transmission Extension
- Replaces: 29544371
- Item Weight: 0.30 Pounds
- Item Dimensions: 8.3 x 8.3 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24262196
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Yukon Submodels:
- Denali Hybrid, Hybrid | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)

2008 GMC Yukon Transfer Case Seal

With a comprehensive array of OEM 2008 GMC Yukon Transfer Case Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 GMC Yukon Transfer Case Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 GMC Yukon Transfer Case Seal Parts and Q&A

Q: How to replace the input shaft transfer case seal on 2008 GMC Yukon?
A: The replacement process of the input shaft seal begins with transferring case removal. Chipping the seal with a point-shaped tool could make it possible to prepare the j 36825 (J 36825 Output Shaft Oil Seal Remover) for removal. The repair process requires using both j 23907 (J 23907 Slide Hammer with Bearing Adapter) together with j 36825 (J 36825 Output Shaft Oil Seal Remover) to successfully extract the input seal. The j 42738 (J 42738 Front Output Shaft Seal Installer) should be used to install the new input shaft seal followed by reinstallation of the Transfer Case.