How to replace the lower control arm ball joint on cast iron lower control arms on 2008 GMC Yukon?

The first step when changing the lower Control Arm Ball Joint on cast iron vehicles calls for lifting and supporting the vehicle before you remove the tire and wheel. You need to disconnect the lower Control Arm from the car. After positioning the lower Control Arm inside a vise you should remove any Ball Joint body crimps with a chisel to prepare for removing the joint from the Control Arm with a pressing tool. Insert the new Ball Joint by fitting its outer flange first then fix the lower Control Arm in place using a vise. Install the crimps on the new Ball Joint through punching while following the position of the replaced Ball Joint. Insert the lower Control Arm back into the vehicle and then put on the tire and wheel as usual. Complete the work by taking out the safety stand then letting the vehicle down before checking wheel alignment.

OEM 2008 GMC Yukon Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ball Joints found

View related parts
2008 GMC Yukon Lower Ball Joint, Front Part Number: 19209396
$67.94 MSRP: $116.69
You Save: $48.75 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stud Kit, Front Lower Control Arm Ball; Suspension Ball Joint; Ball Joint; Stud Kit, Steering Knuckle Lower Control Arm Pivot
- Position: Front Lower
- Replaces: 15922557
- Item Weight: 2.20 Pounds
- Item Dimensions: 7.0 x 4.5 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19209396
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Yukon Submodels:
- Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2008 GMC Yukon Lower Ball Joint, Front Part Number: 19256481
$40.33 MSRP: $66.41
You Save: $26.08 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stud Kit, Front Lower Control Arm Ball; Suspension Ball Joint; Ball Joint; Stud Kit, Steering Knuckle Lower Control Arm Pivot
- Position: Front Lower
- Item Weight: 1.80 Pounds
- Item Dimensions: 7.0 x 4.3 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19256481
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Yukon Submodels:
- Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS

2008 GMC Yukon Ball Joint

With a comprehensive array of OEM 2008 GMC Yukon Ball Joint, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 GMC Yukon Ball Joint are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 GMC Yukon Ball Joint Parts and Q&A

Q: How to replace the lower control arm ball joint on cast iron lower control arms on 2008 GMC Yukon?
A: The first step when changing the lower Control Arm Ball Joint on cast iron vehicles calls for lifting and supporting the vehicle before you remove the tire and wheel. You need to disconnect the lower Control Arm from the car. After positioning the lower Control Arm inside a vise you should remove any Ball Joint body crimps with a chisel to prepare for removing the joint from the Control Arm with a pressing tool. Insert the new Ball Joint by fitting its outer flange first then fix the lower Control Arm in place using a vise. Install the crimps on the new Ball Joint through punching while following the position of the replaced Ball Joint. Insert the lower Control Arm back into the vehicle and then put on the tire and wheel as usual. Complete the work by taking out the safety stand then letting the vehicle down before checking wheel alignment.