How to replace the rear axle shaft on 2008 GMC Canyon?

You must begin the rear Axle Shaft replacement procedure by removing the wheels along with tires. Take off the clip that holds the rear Brake Drum only if needed before continuing with rear Brake Drum removal from the vehicle. Start by taking out the rear axle housing cover followed by dismantling the lock pin bolt and extracting the pinion shaft. The next step is to remove both the c-lock of the rear axle followed by pulling out the rear Axle Shaft. Begin installation with the new rear Axle Shaft alignment and afterward attach both the c-lock on the rear axle and the pinion shaft. Put the lock bolt into place then tighten it to 25 n.m (18 lb ft). First replace the rear brake drums before attaching the rear axle housing cover as well as the gasket onto the housing. Finish the axle-fluid filling procedure before putting back the wheel and tire installation.

OEM 2008 GMC Canyon Axle Shaft

Car Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Axle Shafts found

View related parts
2008 GMC Canyon Differential Assembly, Front Center Part Number: 25792317
$1411.89 MSRP: $2231.53
You Save: $819.64 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Axle, Front Axle And Axle Center; Differential
- Position: Front Center
- Item Weight: 84.30 Pounds
- Item Dimensions: 27.3 x 18.5 x 13.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25792317
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Canyon Submodels:
- SL, SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS
View related parts
2008 GMC Canyon Axle Shaft, Rear Passenger Side Part Number: 19207872
Product Specifications
- Other Name: Shaft, Rear Axle (Right-Hand); Axle Shafts; Shaft, Rear Axle Drive
- Position: Rear Passenger Side
- Replaces: 12479338
- Item Weight: 17.30 Pounds
- Item Dimensions: 36.8 x 7.9 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19207872
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2008 GMC Canyon Axle Shaft, Rear Driver Side Part Number: 19207871
Product Specifications
- Other Name: Shaft, Rear Axle Drive; Axle Shafts
- Position: Rear Driver Side
- Replaces: 12479339
- Item Weight: 19.00 Pounds
- Item Dimensions: 37.8 x 7.7 x 8.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19207871
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2008 GMC Canyon Axle Assembly Part Number: 88964475
Product Specifications
- Other Name: Shaft Kit, Front Wheel Drive; CV Axle Assembly; Axle Shaft; CV Axle; Shaft Kit, Front Axle
- Position: Front
- Item Weight: 17.30 Pounds
- Item Dimensions: 6.1 x 6.1 x 29.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88964475
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 GMC Canyon Axle Assembly Part Number: 25814905
Product Specifications
- Other Name: Axle; Axle Shaft
- Condition: New
- SKU: 25814905
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2008 GMC Canyon Submodels:
- SL, SLE, SLT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2008 GMC Canyon Axle Assembly Part Number: 25814904
Product Specifications
- Other Name: Axle; Axle Shaft
- Condition: New
- SKU: 25814904
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2008 GMC Canyon Submodels:
- SL, SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS
View related parts
2008 GMC Canyon Axle Assembly, Rear Part Number: 25814903
Product Specifications
- Other Name: Axle Assembly-Rear (3.73 Ratio); Axle Shaft; Axle, Rear Axle
- Position: Rear
- Item Weight: 83.90 Pounds
- Item Dimensions: 69.2 x 18.9 x 13.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25814903
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Canyon Submodels:
- SL, SLE, SLT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2008 GMC Canyon Axle Assembly, Rear Part Number: 25814898
Product Specifications
- Other Name: Axle Assembly-Rear (3.73 Ratio); Axle Shaft; Axle, Rear Axle
- Position: Rear
- Item Weight: 80.90 Pounds
- Item Dimensions: 66.7 x 19.1 x 13.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25814898
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Canyon Submodels:
- SL, SLE, SLT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2008 GMC Canyon Axle Assembly, Front Part Number: 20849983
Product Specifications
- Other Name: Axle Assembly-Front (3.73 Ratio); Differential; Axle Shaft; Differential Assembly; Axle, Front Axle And Axle Center
- Position: Front
- Replaces: 15876777
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20849983
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 GMC Canyon Axle Assembly, Front Part Number: 15876776
Product Specifications
- Other Name: Axle Assembly-Front (4.10 Ratio); Differential; Axle Shaft; Differential Assembly; Axle, Front Axle And Axle Center
- Position: Front
- Replaces: 15244551
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15876776
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2008 GMC Canyon Axle Shaft, Rear Passenger Side Part Number: 19208248
Product Specifications
- Other Name: Shaft, Rear Axle (Right-Hand); Axle Shafts; Shaft, Rear Axle Drive
- Position: Rear Passenger Side
- Replaces: 12479336
- Item Weight: 17.70 Pounds
- Item Dimensions: 37.5 x 7.6 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19208248
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2008 GMC Canyon Axle Shaft, Rear Driver Side Part Number: 19208246
Product Specifications
- Other Name: Shaft, Rear Axle Drive; Axle Shafts
- Position: Rear Driver Side
- Replaces: 12479337
- Item Weight: 20.40 Pounds
- Item Dimensions: 47.1 x 10.9 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19208246
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2008 GMC Canyon Axle Shafts, Front Part Number: 19210911
Product Specifications
- Other Name: Shaft Assembly, Front Wheel Drive Intermediate; Axle Shaft; Shaft; Shaft, Front Axle
- Position: Front
- Replaces: 12479300
- Item Weight: 6.70 Pounds
- Item Dimensions: 19.6 x 4.9 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19210911
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 GMC Canyon Differential Assembly, Front Part Number: 20849987
Product Specifications
- Other Name: Axle; Differential; Axle, Front Axle And Axle Center
- Position: Front
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20849987
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2008 GMC Canyon Submodels:
- SL, SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

2008 GMC Canyon Axle Shaft

With a comprehensive array of OEM 2008 GMC Canyon Axle Shaft, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 GMC Canyon Axle Shaft are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 GMC Canyon Axle Shaft Parts and Q&A

Q: How to replace the rear axle shaft on 2008 GMC Canyon?
A: You must begin the rear Axle Shaft replacement procedure by removing the wheels along with tires. Take off the clip that holds the rear Brake Drum only if needed before continuing with rear Brake Drum removal from the vehicle. Start by taking out the rear axle housing cover followed by dismantling the lock pin bolt and extracting the pinion shaft. The next step is to remove both the c-lock of the rear axle followed by pulling out the rear Axle Shaft. Begin installation with the new rear Axle Shaft alignment and afterward attach both the c-lock on the rear axle and the pinion shaft. Put the lock bolt into place then tighten it to 25 n.m (18 lb ft). First replace the rear brake drums before attaching the rear axle housing cover as well as the gasket onto the housing. Finish the axle-fluid filling procedure before putting back the wheel and tire installation.