How to replace the engine oil pressure switch on 2008 Chevrolet Uplander?

In order to replace the engine oil pressure sensor, the negative battery cable should be disconnected and the vehicle must be raised. Pull off the radiator air baffle, unlock the engine harness with sensor and pull it off. Install the sensor, re-connect the harness, re-install the baffle, drop the car and reconnect the battery.

OEM 2008 Chevrolet Uplander Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2008 Chevrolet Uplander Pressure Switch Part Number: 12674782
$28.24 MSRP: $48.07
You Save: $19.83 (42%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Engine Oil Pressure; Pressure Sensor/Switch; Pressure Sensor; Oil Pressure Sending Unit; Sensor, Engine Oil Pressure/Temperature
- Replaces: 12621649, 12621659, 12570798
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.1 x 2.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12674782
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2008 Chevrolet Uplander Oil Pressure Switch

With a comprehensive array of OEM 2008 Chevrolet Uplander Oil Pressure Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Uplander Oil Pressure Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Uplander Oil Pressure Switch Parts and Q&A

Q: How to replace the engine oil pressure switch on 2008 Chevrolet Uplander?
A: In order to replace the engine oil pressure sensor, the negative battery cable should be disconnected and the vehicle must be raised. Pull off the radiator air baffle, unlock the engine harness with sensor and pull it off. Install the sensor, re-connect the harness, re-install the baffle, drop the car and reconnect the battery.