How to replace the Hood Cable for the Primary Latch Release on 2008 Chevrolet Uplander?

In order to replace the Fuel Tank Pressure Sensor, one has to undo the fuel fill cap and disconnect the negative battery cable. After that, take off the rear seat and cover. Dislodge the FTP sensor, and install the new sensor, reconnect the electrical connector and fit the access cover and rear seat and then reconnect the battery cable.

OEM 2008 Chevrolet Uplander Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Hood Cable found

View related parts
2008 Chevrolet Uplander Release Cable Part Number: 15265993
Product Specifications
- Other Name: Handle, Hood Latch; Hood Release Cable; Release Handle
- Replaces: 10405333, 10275693
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.8 x 11.4 x 11.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15265993
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2008 Chevrolet Uplander Hood Cable

With a comprehensive array of OEM 2008 Chevrolet Uplander Hood Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Uplander Hood Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Uplander Hood Cable Parts and Q&A

Q: How to replace the Hood Cable for the Primary Latch Release on 2008 Chevrolet Uplander?
A: In order to replace the Fuel Tank Pressure Sensor, one has to undo the fuel fill cap and disconnect the negative battery cable. After that, take off the rear seat and cover. Dislodge the FTP sensor, and install the new sensor, reconnect the electrical connector and fit the access cover and rear seat and then reconnect the battery cable.