How to replace the Brake Light Switch on 2008 Chevrolet Uplander?

Start the brake pedal position sensor replacement by taking out the instrument panel insulator. Press the connector position assurance without taking it out before removing the electrical cable. Unscrew the sensor and pull out the brake pedal position sensor. Apply adhesive GM P/N 12345493 on the screw before you position the sensor fork on the pin and rotate the sensor to match its locator to the extension bracket hole. Tighten the brake pedal position sensor screw to a torque value of 18 lbs inch with 2 N.m. Secure the CPA connector correctly and test the electrical connection. After installing the new I/P insulator attach the sensor then test and activate the new sensor function.

OEM 2008 Chevrolet Uplander Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2008 Chevrolet Uplander Stoplamp Switch Part Number: 89060201
$13.83 MSRP: $25.98
You Save: $12.15 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Kit, Brake Pedal Position; Brake Light Switch
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.5 x 1.9 x 1.5 inches
- Condition: New
- SKU: 89060201
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2008 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2008 Chevrolet Uplander Brake Light Switch

With a comprehensive array of OEM 2008 Chevrolet Uplander Brake Light Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Uplander Brake Light Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Uplander Brake Light Switch Parts and Q&A

Q: How to replace the Brake Light Switch on 2008 Chevrolet Uplander?
A: Start the brake pedal position sensor replacement by taking out the instrument panel insulator. Press the connector position assurance without taking it out before removing the electrical cable. Unscrew the sensor and pull out the brake pedal position sensor. Apply adhesive GM P/N 12345493 on the screw before you position the sensor fork on the pin and rotate the sensor to match its locator to the extension bracket hole. Tighten the brake pedal position sensor screw to a torque value of 18 lbs inch with 2 N.m. Secure the CPA connector correctly and test the electrical connection. After installing the new I/P insulator attach the sensor then test and activate the new sensor function.