How to replace the rear side door window regulator on 2008 Chevrolet Trailblazer?

You need to start your replacement of the rear side door Window Regulator by taking out the door trim panel along with both water deflector and speaker. Open the regulator window carrier bolts before lifting and sustaining the window in position. The first step is to disconnect the electrical connector at the regulator motor before loosening 3 bolts (part number 123456) which holds the Window Regulator assembly inside the door. Finalize the process by removing the assembly itself. Install the new Window Regulator assembly into its door position while tightening the 3 bolts (part number 123456) to 10 n.m (89 lb in). The regulator motor gets its electrical connector now followed by removing the window support so window lowering onto the regulator window carrier becomes possible. Loosen the regulator window carrier bolts first and then run the window to its highest point inside the channels before torquing the bolts to 10 n.m (89 lb in). Complete the process by returning the speaker and water deflector along with door trim panel.

OEM 2008 Chevrolet Trailblazer Window Regulator

Electric Power Window Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Window Regulators found

View related parts
2008 Chevrolet Trailblazer Window Regulator, Rear Driver Side Part Number: 19331462
$200.60 MSRP: $363.07
You Save: $162.47 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator Assembly, Rear Side Door Window (W/O Motor) (Left-Hand); Regulator, Door And End Gate Window
- Position: Rear Driver Side
- Replaces: 15095069, 15076798, 15893782, 19301971, 10356992, 15205952
- Item Weight: 4.90 Pounds
- Item Dimensions: 25.1 x 16.4 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19331462
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Trailblazer Submodels:
- Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2008 Chevrolet Trailblazer Window Regulator, Front Driver Side Part Number: 19331466
$132.31 MSRP: $259.05
You Save: $126.74 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator Assembly, Front Side Door Window (W/O Motor) (Left-Hand); Regulator, Door And End Gate Window; Regulator, Door Inner Control
- Position: Front Driver Side
- Replaces: 10357004, 15095067, 15205950, 15944000, 15893784, 25824839, 10360625, 15155113, 20930663, 19301968
- Item Weight: 6.00 Pounds
- Item Dimensions: 30.3 x 17.0 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19331466
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Trailblazer Submodels:
- Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2008 Chevrolet Trailblazer Window Regulator, Front Passenger Side Part Number: 19331461
$134.95 MSRP: $264.25
You Save: $129.30 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator Assembly, Front Side Door Window (W/O Motor) (Right-Hand); Power Window Motor and Regulator Assembly; Regulator, Door And End Gate Window; Regulator, Door Inner Control
- Position: Front Passenger Side
- Replaces: 15205951, 20930664, 25824840, 10357005, 10360626, 15095068, 15893785, 19301969, 15155114, 15944001
- Item Weight: 6.20 Pounds
- Item Dimensions: 29.4 x 17.7 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19331461
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Trailblazer Submodels:
- Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2008 Chevrolet Trailblazer Window Regulator, Rear Passenger Side Part Number: 19331463
Product Specifications
- Other Name: Regulator, Rear Door Window Regulator; Power Window Motor and Regulator Assembly; Regulator, Door And End Gate Window
- Position: Rear Passenger Side
- Replaces: 15076799, 15095070, 10356993, 15893783, 19301970, 15205953
- Item Weight: 5.20 Pounds
- Item Dimensions: 8.2 x 25.0 x 16.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19331463
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Trailblazer Submodels:
- Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2008 Chevrolet Trailblazer Window Regulator

With a comprehensive array of OEM 2008 Chevrolet Trailblazer Window Regulator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Trailblazer Window Regulator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Trailblazer Window Regulator Parts and Q&A

Q: How to replace the rear side door window regulator on 2008 Chevrolet Trailblazer?
A: You need to start your replacement of the rear side door Window Regulator by taking out the door trim panel along with both water deflector and speaker. Open the regulator window carrier bolts before lifting and sustaining the window in position. The first step is to disconnect the electrical connector at the regulator motor before loosening 3 bolts (part number 123456) which holds the Window Regulator assembly inside the door. Finalize the process by removing the assembly itself. Install the new Window Regulator assembly into its door position while tightening the 3 bolts (part number 123456) to 10 n.m (89 lb in). The regulator motor gets its electrical connector now followed by removing the window support so window lowering onto the regulator window carrier becomes possible. Loosen the regulator window carrier bolts first and then run the window to its highest point inside the channels before torquing the bolts to 10 n.m (89 lb in). Complete the process by returning the speaker and water deflector along with door trim panel.