How to replace the HVAC control module on 2008 Chevrolet Malibu?

Removing the instrument panel center trim allows the removal of the screws of the HVAC control module, and then module. Unplug the connector harnesses. When installing, make sure the key is off in order to calibrate it. Install the module and the trim panel, and, during calibration, no changes to the controls. Turn on the engine and continue to program.

OEM 2008 Chevrolet Malibu HVAC Control Module

Heater Control Assembly

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 HVAC Control Module found

View related parts
2008 Chevrolet Malibu Heater Control Part Number: 15928223
$268.68 MSRP: $426.58
You Save: $157.90 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control, Heater And Air Conditioner Control; Climate Control Module; Blower Control Switch; Dash Control Unit
- Position: Rear
- Item Weight: 1.20 Pounds
- Item Dimensions: 11.4 x 6.7 x 6.8 inches
- Condition: New
- SKU: 15928223
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Malibu Submodels:
- Hybrid | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV)

2008 Chevrolet Malibu HVAC Control Module

With a comprehensive array of OEM 2008 Chevrolet Malibu HVAC Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Malibu HVAC Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Malibu HVAC Control Module Parts and Q&A

Q: How to replace the HVAC control module on 2008 Chevrolet Malibu?
A: Removing the instrument panel center trim allows the removal of the screws of the HVAC control module, and then module. Unplug the connector harnesses. When installing, make sure the key is off in order to calibrate it. Install the module and the trim panel, and, during calibration, no changes to the controls. Turn on the engine and continue to program.