How to replace the Battery Sensor (LAT) on 2008 Chevrolet Malibu?

Removal of the Battery Current Sensor will require removing the negative battery cable and noting its position to ensure the same is installed. Ground ends squeezer- The sensor can be removed by squeezing the ends of the cable on the ground. Position and install the new sensor in the proper orientation and position and replace the negative battery cable.

OEM 2008 Chevrolet Malibu Battery Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Battery Sensor found

View related parts
2008 Chevrolet Malibu Battery Current Sensor, Green Line Part Number: 13505369
$19.14 MSRP: $35.94
You Save: $16.80 (47%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Battery; Voltage Sensor; Negative Cable Cover; Sensor
- Replaces: 13502261
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.8 x 2.8 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 13505369
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Malibu Submodels:
- Eco, Hybrid, LS, LT, LTZ, Premier | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS

2008 Chevrolet Malibu Battery Sensor

With a comprehensive array of OEM 2008 Chevrolet Malibu Battery Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Malibu Battery Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Malibu Battery Sensor Parts and Q&A

Q: How to replace the Battery Sensor (LAT) on 2008 Chevrolet Malibu?
A: Removal of the Battery Current Sensor will require removing the negative battery cable and noting its position to ensure the same is installed. Ground ends squeezer- The sensor can be removed by squeezing the ends of the cable on the ground. Position and install the new sensor in the proper orientation and position and replace the negative battery cable.