OEM 2008 Chevrolet Corvette Oil Filter

2008 Chevrolet Corvette Oil Filter Parts and Q&A

• Q: How to replace the engine oil and oil filter on 2008 Chevrolet Corvette?

  A: Begin by opening the hood then remove the oil fill cap before changing engine oil and the Oil Filter. Professional equipment should be used to place the vehicle in a raised position. Remove the oil pan Drain Plug first and empty the engine oil into the appropriate container. Separate the engine block from the engine Oil Filter before moving it out from the engine block. Begin installing a new Oil Filter after removing all remnants of the old filter gasket. If it remains, remove it. Tighten the new Oil Filter on the engine block until torque reaches 30 n.m (22 lb ft). Reinstall the oil pan Drain Plug and bolt it down with a torque of 25 n.m (18 lb ft). The vehicle needs to be lowered while abstaining from adding engine oil additives into corvette engines. Add the proper quantity and brand of engine oil into your engine while verifying your oil level afterward. After resetting the engine oil life monitor confirm the installation of an oil fill cap before closing the hood.