How to replace the MAP Sensor on 2008 Chevrolet Colorado?

In order to change the Manifold Absolute Pressure Sensor, disconnect the electrical connector, pressing the retainer locking tabs and removing the retainer. Removed MAP sensor and check the seal, changing the damaged part. Lubricate the seal, and fit the sensor and the retainer, and re-fit the electrical connector.

OEM 2008 Chevrolet Colorado MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2008 Chevrolet Colorado Throttle Position Sensor Part Number: 12711681
$46.60 MSRP: $94.64
You Save: $48.04 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; MAP Sensor; M.A.P. Sensor; Pressure Sensor; Boost Sensor; Sensor; Sensor, Turbocharger/Supercharger
- Replaces: 12694725, 12644228, 12594942, 12701247
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.3 x 4.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12711681
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Colorado Submodels:
- LS, LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

2008 Chevrolet Colorado MAP Sensor

With a comprehensive array of OEM 2008 Chevrolet Colorado MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Colorado MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Colorado MAP Sensor Parts and Q&A

Q: How to replace the MAP Sensor on 2008 Chevrolet Colorado?
A: In order to change the Manifold Absolute Pressure Sensor, disconnect the electrical connector, pressing the retainer locking tabs and removing the retainer. Removed MAP sensor and check the seal, changing the damaged part. Lubricate the seal, and fit the sensor and the retainer, and re-fit the electrical connector.