How to replace the Engine Control Module (ECM) on 2008 Chevrolet Aveo?

The first step for replacing the Engine Control Module (ECM) requires disconnecting both the negative Battery Cable along with the ecm connectors. Begin by taking out the ecm retaining bolts and afterward extract the ecm from its mounting position. Install the ecm by placing it in correct position then secure it to the ecm mount with retaining bolts that need tightening to 4 n.m (35 lb in). Attach the negative Battery Cable together with the Engine Control Module connectors. Post-installation programming of the ecm must be followed by crankshaft position system variation learn procedures and idle learn procedures execution. To obtain information about programming and setup procedures refer to control module references documents.

OEM 2008 Chevrolet Aveo Engine Control Module

Engine Control Computer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Engine Control Modules found

View related parts
2008 Chevrolet Aveo ECM Part Number: 25181750
Product Specifications
- Other Name: Module Assembly, Engine Control; Engine Control Module; Module, Emission Control System
- Replaces: 96440897, 96940280, 96851085
- Item Weight: 1.30 Pounds
- Item Dimensions: 8.2 x 7.4 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25181750
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS
View related parts
2008 Chevrolet Aveo ECM Part Number: 25181752
Product Specifications
- Other Name: Module Assembly, Engine Control; Engine Control Module; Module, Emission Control System
- Replaces: 96943037, 96889682
- Item Weight: 4.40 Pounds
- Item Dimensions: 8.3 x 8.3 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25181752
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS
View related parts
2008 Chevrolet Aveo ECM Part Number: 25181751
Product Specifications
- Other Name: Module Assembly, Engine Control; Engine Control Module; Module, Emission Control System
- Replaces: 96943036
- Item Weight: 4.30 Pounds
- Item Dimensions: 8.2 x 7.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25181751
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS
View related parts
2008 Chevrolet Aveo ECM Part Number: 96851084
Product Specifications
- Other Name: Module Assembly, Engine Control; Engine Control Module
- Replaces: 96440895
- Item Weight: 2.00 Pounds
- Item Dimensions: 9.7 x 7.2 x 2.8 inches
- Condition: New
- SKU: 96851084
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS

2008 Chevrolet Aveo Engine Control Module

With a comprehensive array of OEM 2008 Chevrolet Aveo Engine Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Aveo Engine Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Aveo Engine Control Module Parts and Q&A

Q: How to replace the Engine Control Module (ECM) on 2008 Chevrolet Aveo?
A: The first step for replacing the Engine Control Module (ECM) requires disconnecting both the negative Battery Cable along with the ecm connectors. Begin by taking out the ecm retaining bolts and afterward extract the ecm from its mounting position. Install the ecm by placing it in correct position then secure it to the ecm mount with retaining bolts that need tightening to 4 n.m (35 lb in). Attach the negative Battery Cable together with the Engine Control Module connectors. Post-installation programming of the ecm must be followed by crankshaft position system variation learn procedures and idle learn procedures execution. To obtain information about programming and setup procedures refer to control module references documents.