How to replace the fuel pressure sensor on 2008 Cadillac SRX?

In order to change the hood latch, lift and prop the hood. Take the bolts which hold the latch, pull off the release cable, and the latch. To install, repeat the connection of the cable, re-Install the latch and make sure that it fits correctly in the striker shaft. Lastly, screw up the retaining bolts and then bring the hood down.

OEM 2008 Cadillac SRX Fuel Pressure Sensor

Fuel Tank Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pressure Sensor found

View related parts
2008 Cadillac SRX Fuel Pressure Regulator, Passenger Side Part Number: 16238399
Product Specifications
- Other Name: Sensor, Fuel Tank Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Sensor; Pressure Regulator; Sensor, Early Fuel Evaporation; Fuel Gauge Sending Unit; Tank Pressure Sensor
- Position: Passenger Side
- Replaces: 12206740, 16217059, 16257276, 22678829, 09377680, 12219388, 16196060, 9377680
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.3 x 2.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16238399
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS

2008 Cadillac SRX Fuel Pressure Sensor

With a comprehensive array of OEM 2008 Cadillac SRX Fuel Pressure Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Cadillac SRX Fuel Pressure Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Cadillac SRX Fuel Pressure Sensor Parts and Q&A

Q: How to replace the fuel pressure sensor on 2008 Cadillac SRX?
A: In order to change the hood latch, lift and prop the hood. Take the bolts which hold the latch, pull off the release cable, and the latch. To install, repeat the connection of the cable, re-Install the latch and make sure that it fits correctly in the striker shaft. Lastly, screw up the retaining bolts and then bring the hood down.