How to replace the rear wheel bearing and hub on 2008 Buick Lucerne?

Start replacement work by lifting and placing support underneath the vehicle. Uninstall the wheel and tire then take off the brake rotor. Disconnect the Wheel Bearing/hub electrical connector and remove its bolts to pull out the Wheel Bearing/hub lower and the brake shield from the lower Control Arm. Wash both sides of the Control Arm as well as the hub area before you assemble the parts. Place the brake shield in its position and put the Wheel Bearing/hub to the Control Arm. Secure the Wheel Bearing/hub bolts to 68 n.m (50 lb ft) at their tightest setting. Reattach the wheel/hub wire and put back on the brake rotor before replacing the tire and wheel assembly below the vehicle.

OEM 2008 Buick Lucerne Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wheel Bearings found

View related parts
2008 Buick Lucerne Hub Assembly, Front Part Number: 84641365
$210.54 MSRP: $412.24
You Save: $201.70 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Hub Assembly, Front Wheel (W/Wheel Speed Sensor); Front Hub & Bearing; Front Wheel Hub Kit; Rear Wheel Hub
- Position: Front
- Replaced by: 19433930
- Item Weight: 10.20 Pounds
- Condition: New
- SKU: 84641365
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Buick Lucerne Hub & Bearing, Rear Part Number: 21998965
Product Specifications
- Other Name: Hub, Rear Wheel; Wheel Bearing and Hub Assembly; Wheel Bearing & Hub Assembly; Wheel Bearing; Axle Bearing; Wheel Hub; Hub & Bearing Assembly
- Position: Rear
- Item Weight: 8.40 Pounds
- Item Dimensions: 8.3 x 7.2 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 21998965
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS

2008 Buick Lucerne Wheel Bearing

With a comprehensive array of OEM 2008 Buick Lucerne Wheel Bearing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Buick Lucerne Wheel Bearing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Buick Lucerne Wheel Bearing Parts and Q&A

Q: How to replace the rear wheel bearing and hub on 2008 Buick Lucerne?
A: Start replacement work by lifting and placing support underneath the vehicle. Uninstall the wheel and tire then take off the brake rotor. Disconnect the Wheel Bearing/hub electrical connector and remove its bolts to pull out the Wheel Bearing/hub lower and the brake shield from the lower Control Arm. Wash both sides of the Control Arm as well as the hub area before you assemble the parts. Place the brake shield in its position and put the Wheel Bearing/hub to the Control Arm. Secure the Wheel Bearing/hub bolts to 68 n.m (50 lb ft) at their tightest setting. Reattach the wheel/hub wire and put back on the brake rotor before replacing the tire and wheel assembly below the vehicle.