How to replace the Radius Heat Shield on 2008 Buick Lucerne?

In order to remove the steering gear heat shield, first, raise and support the vehicle. Disconnect the stabilizer shaft links, and then turn the stabilizer shaft down. Now, pull out the plastic clip on the power steering gear heat shield, then the retaining bolts and remove the heat shield as well. For installation, also install new power steering gear heat shield in place and make sure to refer to the fastener notice. Support the assembly by the cut out and install he retaining bolts and tighten the bolts to 9 n.m (80 lb in). Reconnect the plastic clip to the heat shield and reinstall the stabilizer shaft links before lowering the vehicle.

OEM 2008 Buick Lucerne Radius Heat Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Radius Heat Shield found

View related parts
2008 Buick Lucerne Heat Shield Part Number: 15824853
Product Specifications
- Other Name: Shield-Steering Gear Heat; Radius Heat Shield; Shield, Steering Gear Mounting
- Item Weight: 0.30 Pounds
- Item Dimensions: 17.9 x 9.1 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15824853
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS

2008 Buick Lucerne Radius Heat Shield

With a comprehensive array of OEM 2008 Buick Lucerne Radius Heat Shield, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Buick Lucerne Radius Heat Shield are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Buick Lucerne Radius Heat Shield Parts and Q&A

Q: How to replace the Radius Heat Shield on 2008 Buick Lucerne?
A: In order to remove the steering gear heat shield, first, raise and support the vehicle. Disconnect the stabilizer shaft links, and then turn the stabilizer shaft down. Now, pull out the plastic clip on the power steering gear heat shield, then the retaining bolts and remove the heat shield as well. For installation, also install new power steering gear heat shield in place and make sure to refer to the fastener notice. Support the assembly by the cut out and install he retaining bolts and tighten the bolts to 9 n.m (80 lb in). Reconnect the plastic clip to the heat shield and reinstall the stabilizer shaft links before lowering the vehicle.