How to replace the Mass Air Flow Sensor/intake air temperature sensor on 2008 Buick Lucerne?

Removal In order to replace Mass Air Flow Sensor / Intake Air Temperature Sensor, intake manifold cover and disconnection of electrical connector. Unscrew the clamp on the air cleaner outlet duct and take out the duct. Remove the sensor, install it with care and attach it with bolts. This can be reattached by reconnecting the duct and the electrical connector.

OEM 2008 Buick Lucerne Mass Air Flow Sensor

MAF Sensor Meter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Mass Air Flow Sensor found

View related parts
2008 Buick Lucerne Mass Air Flow Sensor Part Number: 19351887
Product Specifications
- Other Name: Sensor Assembly, Mass Airflow; Air Mass Sensor
- Replaces: 10349461, 15911983, 19330124
- Item Weight: 2.30 Pounds
- Item Dimensions: 5.3 x 5.5 x 6.4 inches
- Condition: New
- SKU: 19351887
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS

2008 Buick Lucerne Mass Air Flow Sensor

With a comprehensive array of OEM 2008 Buick Lucerne Mass Air Flow Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Buick Lucerne Mass Air Flow Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Buick Lucerne Mass Air Flow Sensor Parts and Q&A

Q: How to replace the Mass Air Flow Sensor/intake air temperature sensor on 2008 Buick Lucerne?
A: Removal In order to replace Mass Air Flow Sensor / Intake Air Temperature Sensor, intake manifold cover and disconnection of electrical connector. Unscrew the clamp on the air cleaner outlet duct and take out the duct. Remove the sensor, install it with care and attach it with bolts. This can be reattached by reconnecting the duct and the electrical connector.