How to replace the ignition coil for Bank 2 on 2008 Buick LaCrosse?

The Ignition Coil replacement for bank 2 commences after turning off ignition and removing an engine cover to check parts without severing fuel pipes or hoses. Before changing the Ignition Coil for cylinder 2 you must disconnect the air cleaner duct from the Throttle Body as well as the positive crankcase ventilation (PCV) hose from the right bank camshaft cover but maintain the upper and lower intake manifolds in position. After removing the Intake Manifold bolts with bracing bolts (1 and 2) and the brace, reposition the upper Intake Manifold with the lower Intake Manifold to gain access for removing the ignition coils. First remove the Ignition Coil electrical connectors before taking out Ignition Coil bolts for Ignition Coil extraction. To install the coils put them back in their place according to the fastener notice and fasten the bolts to 10 n.m (89 lb in) torque and reattach the electrical connectors.

OEM 2008 Buick LaCrosse Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Ignition Coils found

View related parts
2008 Buick LaCrosse Spark Plug Part Number: 19418102
$83.97 MSRP: $172.56
You Save: $88.59 (52%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Coil Assembly, Ignition; Ignition Coil; Coil, Ignition Coil
- Replaces: 12583514, 12613057, 12629037
- Item Weight: 0.90 Pounds
- Item Dimensions: 8.9 x 3.9 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19418102
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- CXS | 6 Cyl 3.6 L GAS
View related parts
2008 Buick LaCrosse Ignition Coil Part Number: 12611424
$79.39 MSRP: $163.16
You Save: $83.77 (52%)
ADD TO CART
Product Specifications
- Other Name: Coil, Ignition; Direct Ignition Coil; Coil; Coil, Ignition Coil
- Replaced by: 12739916
- Replaces: 12570616
- Item Weight: 0.90 Pounds
- Item Dimensions: 4.9 x 2.9 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12611424
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- Super | 8 Cyl 5.3 L GAS
View related parts
2008 Buick LaCrosse Ignition Coil Part Number: 12699382
$79.39 MSRP: $163.16
You Save: $83.77 (52%)
ADD TO CART
Product Specifications
- Other Name: Coil Assembly-Ignition; Ignition Module; Coil; Coil, Ignition Coil
- Replaced by: 12739916
- Replaces: 12573190
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.5 x 2.8 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12699382
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- Super | 8 Cyl 5.3 L GAS
View related parts
2008 Buick LaCrosse Ignition Coil Part Number: 19418991
$52.41 MSRP: $107.70
You Save: $55.29 (52%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Coil Assembly, Ignition; Coil Assembly; Coil; Coil, Ignition Coil
- Replaces: 10472401, 10482928, 19353734
- Condition: New
- SKU: 19418991
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2008 Buick LaCrosse Submodels:
- CX, CXL | 6 Cyl 3.8 L GAS

2008 Buick LaCrosse Ignition Coil

With a comprehensive array of OEM 2008 Buick LaCrosse Ignition Coil, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Buick LaCrosse Ignition Coil are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Buick LaCrosse Ignition Coil Parts and Q&A

Q: How to replace the ignition coil for Bank 2 on 2008 Buick LaCrosse?
A: The Ignition Coil replacement for bank 2 commences after turning off ignition and removing an engine cover to check parts without severing fuel pipes or hoses. Before changing the Ignition Coil for cylinder 2 you must disconnect the air cleaner duct from the Throttle Body as well as the positive crankcase ventilation (PCV) hose from the right bank camshaft cover but maintain the upper and lower intake manifolds in position. After removing the Intake Manifold bolts with bracing bolts (1 and 2) and the brace, reposition the upper Intake Manifold with the lower Intake Manifold to gain access for removing the ignition coils. First remove the Ignition Coil electrical connectors before taking out Ignition Coil bolts for Ignition Coil extraction. To install the coils put them back in their place according to the fastener notice and fasten the bolts to 10 n.m (89 lb in) torque and reattach the electrical connectors.