How to replace the Shift Solenoid and transmission control module assembly on 2008 Buick Enclave?

Remove control valve body cover, disconnect input/output speed sensor and shift-position connectors, unbolt and lift out the control solenoid valve body/TCM assembly with spring, discard the filter plate. Inspect seals and bolt holes, replacing if damaged. Install new filter plate and assembly, tighten bolts in sequence, reconnect connectors, reinstall cover, perform fast-learn adaptation.

OEM 2008 Buick Enclave Shift Solenoid

Transmission Shift Solenoid

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Shift Solenoid found

View related parts
2008 Buick Enclave Solenoid Part Number: 22870635
$42.81 MSRP: $73.53
You Save: $30.72 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Solenoid, Transmission Shift Brake Interlock; Shift Interlock Solenoid
- Replaces: 25778919
- Item Weight: 0.60 Pounds
- Item Dimensions: 6.3 x 5.2 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22870635
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick Enclave Submodels:
- Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS

2008 Buick Enclave Shift Solenoid

With a comprehensive array of OEM 2008 Buick Enclave Shift Solenoid, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Buick Enclave Shift Solenoid are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Buick Enclave Shift Solenoid Parts and Q&A

Q: How to replace the Shift Solenoid and transmission control module assembly on 2008 Buick Enclave?
A: Remove control valve body cover, disconnect input/output speed sensor and shift-position connectors, unbolt and lift out the control solenoid valve body/TCM assembly with spring, discard the filter plate. Inspect seals and bolt holes, replacing if damaged. Install new filter plate and assembly, tighten bolts in sequence, reconnect connectors, reinstall cover, perform fast-learn adaptation.