How to replace the Crankshaft Position Sensor on 2007 GMC Sierra 1500?

In order to replace the Crankshaft Position Sensor, first, lift and safely suspend the vehicle. If necessary, take off the oil pan skid plate and its bolts. Unplug the engine wiring harness electrical connectors from the crankshaft position (CKP) sensor, and set the CKP sensor back bolt and the sensor apart. When installing the new CKP sensor, be sure it is seated fully before tightening the bolt to prevent erratic performance and false diagnostic trouble codes (DTCs). If restocking the old CKP sensor, which until now should be brand new O-ring seal on the sensor and oiling with clean engine oil. Mount the CKP sensor with the bolt, tighten the bolt to 10 N.m (89 lb in). Connect the CKP sensor wiring harness electrical connector once again. In cases where appropriate, place the oil pan skid plate and bolt it to the engine, tightening to 28 N.m (21 lb ft). Finally, lower the car and conduct crankshaft position system variation learn procedure.

OEM 2007 GMC Sierra 1500 Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Crankshaft Position Sensors found

View related parts
2007 GMC Sierra 1500 Crankshaft Position Sensor Part Number: 12703627
$60.13 MSRP: $107.38
You Save: $47.25 (44%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 12585546
- Item Weight: 2.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12703627
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Sierra 1500 Submodels:
- Denali, Hybrid, SL, SLE, SLT, WT, XFE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2007 GMC Sierra 1500 Crankshaft Position Sensor Part Number: 12595966
$36.96 MSRP: $75.06
You Save: $38.10 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Crankshaft Sensor
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.2 x 2.1 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12595966
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Sierra 1500 Submodels:
- WT | 6 Cyl 4.3 L GAS
View related parts
2007 GMC Sierra 1500 Camshaft Position Sensor Part Number: 19417445
$69.96 MSRP: $124.92
You Save: $54.96 (44%)
Product Specifications
- Other Name: Sensor Assembly, Camshaft Position (Kit); Engine Camshaft Position Sensor; Camshaft Sensor; Cam Sensor; Position Sensor; Switch; Sensor, Distributor (Also Knock Sensor)
- Replaces: 10490645, 10485432
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.4 x 2.7 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19417445
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Sierra 1500 Submodels:
- Base, HT, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS

2007 GMC Sierra 1500 Crankshaft Position Sensor

With a comprehensive array of OEM 2007 GMC Sierra 1500 Crankshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 GMC Sierra 1500 Crankshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 GMC Sierra 1500 Crankshaft Position Sensor Parts and Q&A

Q: How to replace the Crankshaft Position Sensor on 2007 GMC Sierra 1500?
A: In order to replace the Crankshaft Position Sensor, first, lift and safely suspend the vehicle. If necessary, take off the oil pan skid plate and its bolts. Unplug the engine wiring harness electrical connectors from the crankshaft position (CKP) sensor, and set the CKP sensor back bolt and the sensor apart. When installing the new CKP sensor, be sure it is seated fully before tightening the bolt to prevent erratic performance and false diagnostic trouble codes (DTCs). If restocking the old CKP sensor, which until now should be brand new O-ring seal on the sensor and oiling with clean engine oil. Mount the CKP sensor with the bolt, tighten the bolt to 10 N.m (89 lb in). Connect the CKP sensor wiring harness electrical connector once again. In cases where appropriate, place the oil pan skid plate and bolt it to the engine, tightening to 28 N.m (21 lb ft). Finally, lower the car and conduct crankshaft position system variation learn procedure.