How to Service and Repair the Steering Linkage for Inner Tie Rod End Replacement on 2007 GMC Sierra 1500 Classic?

To carry out the service and repair of the steering linkage, specifically for the inner tie rod replacement; raise the vehicle and remove an engine protection shield if there are one available. Next, remove the outer Tie Rod End, and then inner tie rod wrench (J 34028) with the inner Tie Rod End. Before the new tie rod ends can be installed, all oil, grease, or other contaminant must be cleaned, the threads of the tie rod must be cleaned with denatured alcohol or the equivalent, cleared of all substance and allowed to become dry. Lubricate the threads of the inner tie rod using red loctite threadlocker (GM P/N 12345493, Canadian P/N 10953488). Install the inner tie rod to the relay rod and tighten it using inner tie rod wrench (J34028) to 100 nm (74 ft. Lbs.). Then, set the outer Tie Rod End, reinstall the engine protection shield if so, lower the vehicle, and ensure its wheel alignment.

OEM 2007 GMC Sierra 1500 Classic Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Tie Rod Ends found

View related parts
2007 GMC Sierra 1500 Classic Outer Tie Rod Part Number: 19352244
$97.05 MSRP: $165.23
You Save: $68.18 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
- Position: Outer
- Replaced by: 85819772
- Item Weight: 1.50 Pounds
- Item Dimensions: 5.9 x 2.8 x 10.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19352244
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Sierra 1500 Classic Submodels:
- Denali, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2007 GMC Sierra 1500 Classic Outer Tie Rod Part Number: 19149617
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Replaces: 12471376
- Item Weight: 1.60 Pounds
- Item Dimensions: 7.0 x 4.3 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19149617
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Sierra 1500 Classic Submodels:
- Denali, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2007 GMC Sierra 1500 Classic Outer Tie Rod Part Number: 26076544
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Item Weight: 1.90 Pounds
- Item Dimensions: 6.0 x 5.2 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26076544
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Sierra 1500 Classic Submodels:
- Denali, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2007 GMC Sierra 1500 Classic Tie Rod End

With a comprehensive array of OEM 2007 GMC Sierra 1500 Classic Tie Rod End, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 GMC Sierra 1500 Classic Tie Rod End are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 GMC Sierra 1500 Classic Tie Rod End Parts and Q&A

Q: How to Service and Repair the Steering Linkage for Inner Tie Rod End Replacement on 2007 GMC Sierra 1500 Classic?
A: To carry out the service and repair of the steering linkage, specifically for the inner tie rod replacement; raise the vehicle and remove an engine protection shield if there are one available. Next, remove the outer Tie Rod End, and then inner tie rod wrench (J 34028) with the inner Tie Rod End. Before the new tie rod ends can be installed, all oil, grease, or other contaminant must be cleaned, the threads of the tie rod must be cleaned with denatured alcohol or the equivalent, cleared of all substance and allowed to become dry. Lubricate the threads of the inner tie rod using red loctite threadlocker (GM P/N 12345493, Canadian P/N 10953488). Install the inner tie rod to the relay rod and tighten it using inner tie rod wrench (J34028) to 100 nm (74 ft. Lbs.). Then, set the outer Tie Rod End, reinstall the engine protection shield if so, lower the vehicle, and ensure its wheel alignment.