How to replace the rear crankshaft seal on 2007 GMC Canyon?

Beginning the Crankshaft rear oil seal replacement process starts with Flywheel removal through careful Crankshaft and seal bore protection. Using an appropriate tool remove the Crankshaft rear oil seal from its position within the Crankshaft rear oil seal housing before discarding the old seal. Before installing the new Crankshaft rear oil seal apply a thin layer of clean engine oil to its lip. Place the plastic sleeve that accompanies the new seal directly onto the Crankshaft. The rear seal installer (J 44215) working together with the driver handle (J 8092) enables users to place the Crankshaft rear oil seal inside the housing while following three essential installation criteria: proper spring direction towards the engine, precise installation alignment and complete seal travel until it reaches the housing stop position. Finally, reinstall the Flywheel.

OEM 2007 GMC Canyon Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Seals found

View related parts
2007 GMC Canyon Rear Main Seal Part Number: 89018205
$25.91 MSRP: $42.69
You Save: $16.78 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Crankshaft Rear Oil; Crankshaft Seal; Seal, Engine Rear Main Bearing
- Position: Rear
- Replaces: 12568124
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.1 x 4.2 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89018205
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2007 GMC Canyon Oil Seal Part Number: 89017622
$17.11 MSRP: $28.18
You Save: $11.07 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Engine Rear Main Bearing; Timing Cover Gasket; Timing Cover Seal; Crankshaft Seal; Front Crank Seal; Engine Front Cover & Crankshaft Seal.
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.1 x 6.3 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89017622
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS

2007 GMC Canyon Crankshaft Seal

With a comprehensive array of OEM 2007 GMC Canyon Crankshaft Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 GMC Canyon Crankshaft Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 GMC Canyon Crankshaft Seal Parts and Q&A

Q: How to replace the rear crankshaft seal on 2007 GMC Canyon?
A: Beginning the Crankshaft rear oil seal replacement process starts with Flywheel removal through careful Crankshaft and seal bore protection. Using an appropriate tool remove the Crankshaft rear oil seal from its position within the Crankshaft rear oil seal housing before discarding the old seal. Before installing the new Crankshaft rear oil seal apply a thin layer of clean engine oil to its lip. Place the plastic sleeve that accompanies the new seal directly onto the Crankshaft. The rear seal installer (J 44215) working together with the driver handle (J 8092) enables users to place the Crankshaft rear oil seal inside the housing while following three essential installation criteria: proper spring direction towards the engine, precise installation alignment and complete seal travel until it reaches the housing stop position. Finally, reinstall the Flywheel.