Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2007 GMC Acadia A/C Clutch

Air Conditioning Clutch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 A/C Clutch found

  • 2007 GMC Acadia A/C Clutch - 86807268
    2007 GMC Acadia A/C Clutch Diagram - 86807268
    View related parts

    2007 GMC Acadia Clutch Assembly Part Number: 86807268

    $246.59 MSRP: $442.34
    You Save: $195.75 (45%)
    Product Specifications
    • Other Name: Clutch Kit, Air Conditioner Compressor Clutch; Clutch; Clutch Kit, A/C Compressor Clutch
    • Replaces: 15926084
    • Condition: New
    • SKU: 86807268
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following 2007 GMC Acadia Submodels:
    • Denali, SL, SLE, SLT | 6 Cyl 3.6 L GAS

2007 GMC Acadia A/C Clutch

With a comprehensive array of OEM 2007 GMC Acadia A/C Clutch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 GMC Acadia A/C Clutch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 GMC Acadia A/C Clutch Parts and Q&A

  • Q: How to replace the A/C Clutch assembly on 2007 GMC Acadia?
    A: The procedure starts with vehicle support and belt removal before choosing to work on the compressor clutch assembly. Move on to remove the clutch plate retaining bolt followed by the clutch plate assembly. Start by removing the clutch hub/bearing snap ring then proceed with removing the clutch hub/bearing assembly. Unfasten the snap ring on the clutch coil before extracting the clutch coil from the A/C Compressor . Mount the clutch coil onto the A/C Compressor before sealing it with snap ring. Place a thin air gap shim pre-oiled inside the clutch plate before starting assembly of the clutch plate. Check for drive plate contact with the pulley before measuring the pulley-drive plate air gap. Adjust the shims to produce a 0.35-0.65 mm (0.014-0.026 in) air gap. Finally tighten the clutch plate retaining bolt to 18 n.m (13 lb ft) before replacing the Drive Belt and engine protection shield and lowering the vehicle.

Related 2007 GMC Acadia Parts

Alternate Year Models

+
2008 GMC Acadia A/C Clutch